PDA

View Full Version : Squeezebox and WEP with SMC Barricade



Mike
2004-10-15, 08:55
Hi James,

Thanks for the info. I tried playing with this for several hours
last night and still no luck. My version of the 2804WBR is a
different part number from yours based on the firmware version you
are running. SMC lists two sets of firmware on their web site
based on the part no. At any rate -- I cannot figure out any way
to get my 2804 to run in pre-shared key mode that does not involve
WPA. If I tell the Squeezebox that their is no encryption then it
can find the wireless network but cannot pass data (expected for
an "open" mode system ).


I hope that they will provide an update to the Squeezebox that will
allow it to work in an "Open" system WEP environment OR provide
WPA support. I have seen both items talked about in the discussion
archives. Hey guys -- any ETA on these features? I have to
believe that enabling "open" mode support would not be too
difficult.


BTW: My SMC 2804WBR firmware version is V1.11a

If anyone has any other ideas please let me know.

Thanks,

Mike



>
> From: "James Dunn" <james.dunn (AT) hedgehog-house (DOT) co.uk>
> Date: 2004/10/14 Thu PM 03:45:34 EDT
> To: "Slim Devices Discussion" <discuss (AT) lists (DOT) slimdevices.com>
> Subject: [slim] Squeezebox and WEP with SMC Barricade
>
> Mike,
>
> I use an SMC2804WBR for exactly this purpose and it works fine. Based on
> the SMC pages:
>
> Security:
> WEP - 128 bit with pre-shared ascii key. WPA is disabled.
>
> Wireless
> SSID was enabled to aid discovery but is now disabled, Long range 11b&11g,
> gNitro - enabled (although I'm not sure that I meant that), Transmit - auto,
> Channel 11.
>
> WDS:
> Disabled
>
> Firmware:
> V1.00.007.1 2004.03.11
>
> Cheers,
>
> James
>
> -----Original Message-----
> From: discuss-bounces (AT) lists (DOT) slimdevices.com
> [mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of Mike
> Sent: Thursday, October 14, 2004 7:36 PM
> To: discuss (AT) lists (DOT) slimdevices.com
> Subject: [slim] Squeezebox and WEP with SMC Barricade
>
> Hello All,
>
> I have a SMC 2804WBR Barricade wireless B/G AP/router. I have been unable
> to get the Squeezebox to find the wireless network. If I disable WEP on the
> router then everything works fine. I know that the key is correct and I
> have tried both 64 and 128 bit WEP. I have not figured out how to set the
> SMC router to use "shared" authentication vs. "open". I belive that the
> problem is that the SMC is only running in "open" mode. Is there any
> updates as to when the Squeezebox will support "open" mode with WEP? Does
> anyone know how to convince an SMC Barricade router to work in "shared"
> authentication mode.
>
> Thanks,
>
> Mike
>
>