PDA

View Full Version : Help with firmware / network signals



Nick F Ryman-Tubb at MindsI
2004-09-16, 02:38
Dean/anyone

Do you know if the Ethernet activity signal (pin 13) and Ethernet link
signal (pin 14) on the internal connector has somehow been turned off in the
latest firmware - as I get no signal from these in either wired or wireless
versions?

I am building a hifi and 19" rack version (which you might like in the
"Custom Installation and Hardware Mods" section).

Thanks for help.

Nick

seanadams
2004-09-19, 08:52
Nick,

Yes - it looks like i had them disabled - I was using those pins to
test some other things and forgot to set them back to being the
ethernet leds. They'll be on in the next firmware rev which should be
coming Monday.

BTW you'll want to wire these with resistors (about 560ohms) to +3.3V.

Sean



On Sep 16, 2004, at 2:38 AM, Nick F Ryman-Tubb at MindsI wrote:

> Dean/anyone
>
> Do you know if the Ethernet activity signal (pin 13) and Ethernet link
> signal (pin 14) on the internal connector has somehow been turned off
> in the
> latest firmware - as I get no signal from these in either wired or
> wireless
> versions?
>
> I am building a hifi and 19" rack version (which you might like in the
> "Custom Installation and Hardware Mods" section).
>
> Thanks for help.
>
> Nick
>
>
>
>