PDA

View Full Version : Screensaver suggestions



fcm4711
2004-08-27, 11:07
Hi all

The plugin called ExtendedIO.pm is up to date
and works fine with Squeezebox.
As Kevin mentioned it needs some additional
hardware connected to the geek port. I have
currently hooked up an old remote control
(that happened to be compatible with my amplifier
after tweeking the timing a little bit) that
turns the amplifier on and off.
The ultimate thing would be a programmable /
learnable remote control, but I didn't find the
time yet to come up with a easy solution.

The plugin, pinout etc. can be found here:
http://www.gwendesign.com/slimserver/development.htm#io_extension

Cheers
Felix


--- kdf <slim-mail (AT) deane-freeman (DOT) com> wrote:

> Quoting Jason Holtzapple
> <jasonholtzapple (AT) yahoo (DOT) com>:
>
> > >> Jason Holtzapple wrote:
> > >>
> > >> I'm working on a similar "energy-saver" type
> plugin at the moment.
> > >
> > > Andy Lucas wrote:
> > >
> > > It would be neat if this could also drive an
> external device to remove
> > power
> > > from an amp or powered speakers....
> > > Don't see much point in turning off the
> squeezebox if everything else is
> > > still on as the amount of current this draws
> must be pretty small.
> >
> > I don't have this sort of setup so this
> functionality won't be in there.
> > It should be easy for someone else to add in
> though.
>
> Felix had an old plugin that could control external
> switches. It needed a bit
> of added hardware, but I'm sure it could be modified
> to use the geekport on
> squeezebox. Of course, I'm not sure if that info is
> suported yet on the port.
> -kdf
>