PDA

View Full Version : After power loss Squeezebox G refuses to connect



Phil Wood
2004-08-19, 06:40
Running DHCP?

Same things happened here - When the server rebooted at powerup, my DHCP
server gave it a new IP address and none of the Squeezeboxes could find it.
Simply step through the network setup again ...

_____________________
Phil Wood
woodp (AT) woodp (DOT) com
http://www.woodp.com/

> -----Original Message-----
> From: Jason [mailto:jason (AT) pagefamily (DOT) net]
> Sent: Thursday, August 19, 2004 1:06 AM
> To: 'Slim Devices Discussion'
> Subject: [slim] After power loss Squeezebox G refuses to connect
>
>
> Something rather odd has happened this evening. I lost power for about 2
> hours (we have a huge storm going here in Colorado) . my UPS
> kicked on and I
> dutifully shut my network down.
>
> After power was restored I fired everything back up and verified that
> Slimserver.pl was running on my Linux machine. My SliMP3 has re-connected
> with no problems at all. The wireless squeezebox G refuses to connect,
> complaining that it has lost contact with the server (says lost
> contact with
> server, check that the server software is running).
>
> What gives? I've never had a problem like this. I had this problem
> initially after upgrading to the G display, but upgraded the slimserver
> software and seemed to take care of it, but here I am again.
>
> Slimserver running the nightly from three days ago, Squeezebox on FW33.
>
>