PDA

View Full Version : After power loss Squeezebox G refuses to connect



Nalle Johansson
2004-08-19, 01:08
Slim Devices Discussion <discuss (AT) lists (DOT) slimdevices.com> på
den 19 augusti 2004 vid 10:10 +0100 skrev:
>
>OK, I am thinking this is a bug. I restarted slimserver a
>few times, no
>effect, rebooted the squeezebox several times, no effect.
>
>I stepped through the squeezebox setup manually (changing
>no settings at
>all) and bingo it starts to work.
I have the same problem with a wireless device (with
textdisplay). But with an older firmware.
I think the problem is that is tryes to reconnect using
wire.

Bästa hälsningar/Best Regards
Nalle Johansson
--
Nalle Johansson, IT-chef
GFS Studentservice * Göteborgs Förenade Studentkårer
Kansli: 031-16 64 21 * Direkt: 031-18 59 68 * Mobil:
0703-90 03 96
Fax: 031-16 28 71 * Fax2Mail: 0703-86 03 96 * Mail2Fax:
nalle.fax (AT) gfs (DOT) se
E-post: nalle (AT) gfs (DOT) se * Webb: http://www.gfs.se *
FirstClass: fcp://fc.gsn.se

Jason
2004-08-19, 01:10
OK, I am thinking this is a bug. I restarted slimserver a few times, no
effect, rebooted the squeezebox several times, no effect.

I stepped through the squeezebox setup manually (changing no settings at
all) and bingo it starts to work.


-----Original Message-----
From: discuss-bounces (AT) lists (DOT) slimdevices.com
[mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of Jason
Sent: Thursday, August 19, 2004 2:06 AM
To: 'Slim Devices Discussion'
Subject: [slim] After power loss Squeezebox G refuses to connect

Something rather odd has happened this evening. I lost power for about 2
hours (we have a huge storm going here in Colorado) . my UPS kicked on and I
dutifully shut my network down.

After power was restored I fired everything back up and verified that
Slimserver.pl was running on my Linux machine. My SliMP3 has re-connected
with no problems at all. The wireless squeezebox G refuses to connect,
complaining that it has lost contact with the server (says lost contact with
server, check that the server software is running).

What gives? I've never had a problem like this. I had this problem
initially after upgrading to the G display, but upgraded the slimserver
software and seemed to take care of it, but here I am again.

Slimserver running the nightly from three days ago, Squeezebox on FW33.