PDA

View Full Version : Firmware upgrade



Karl
2004-06-21, 14:06
Tried both with no luck :-(

-----Original Message-----
From: discuss-bounces (AT) lists (DOT) slimdevices.com
[mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of Sean Adams
Sent: 21 June 2004 21:56
To: Slim Devices Discussion
Subject: [slim] Firmware upgrade


Karl,

Probably this is the bug that we recently fixed - the trick is getting
the newer rev with the fix to load now.... please try two things:

1) try doing the update over ethernet instead of 802.11
2) if you're comfortable opening the case and you have a torx size 10
screwdriver handy, please try removing the wireless card. Then put the
wireless back in after doing the upgrade.

Let us know how it goes.

Thanks,
Sean

On Jun 21, 2004, at 1:44 PM, Karl wrote:

> Just download latest and canít get the firmware loaded
>
>
>
> Current firmware version 20
>
>
>
> Ever time I power up is say hold bright etc Ė progress bar then back
> to hold bright
>
>
>
> Tried power cycle and same every time
>
>
>
> Any ideas
>

seanadams
2004-06-21, 14:27
Crapola - let's get it swapped out for you then. If you bought from a
dealer in Europe, please contact them for replacement. Otherwise
support (AT) slimdevices (DOT) com can do it.

On Jun 21, 2004, at 2:06 PM, Karl wrote:

> Tried both with no luck :-(
>
> -----Original Message-----
> From: discuss-bounces (AT) lists (DOT) slimdevices.com
> [mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of Sean Adams
> Sent: 21 June 2004 21:56
> To: Slim Devices Discussion
> Subject: [slim] Firmware upgrade
>
>
> Karl,
>
> Probably this is the bug that we recently fixed - the trick is getting
> the newer rev with the fix to load now.... please try two things:
>
> 1) try doing the update over ethernet instead of 802.11
> 2) if you're comfortable opening the case and you have a torx size 10
> screwdriver handy, please try removing the wireless card. Then put the
> wireless back in after doing the upgrade.
>
> Let us know how it goes.
>
> Thanks,
> Sean
>
> On Jun 21, 2004, at 1:44 PM, Karl wrote:
>
>> Just download latest and canít get the firmware loaded
>>
>>
>>
>> Current firmware version 20
>>
>>
>>
>> Ever time I power up is say hold bright etc Ė progress bar then back
>> to hold bright
>>
>>
>>
>> Tried power cycle and same every time
>>
>>
>>
>> Any ideas
>>