PDA

View Full Version : QED Systemline remote 'systemline.ir' file



GregD
2009-08-21, 15:36
I recently had a request for this - but I can't reply - so I thought I'd just post it in case it helps.

The Systemline is a multi-room controller with an IR blaster control facility and control pads in each room.

This configures a few of the buttons on the wall pads to control the SB.

To make it work you have to tell the systemline that you have a Pioneer VCR - and then the VCR control buttons will work with this file.

You just add this to the IR directory in Squeezecenter, and configure it 'on'

Suggest you call the following systemline.ir
# These are codes for the QED systemline multi-room controller
# I've used bank 4 pioneer VCR codes for the Squeezebox - note the default for bank 4 is RC5 which the SB2 can't understand

# A real pioneer VCR would have way more buttons!

# Note these are the codes output from the QED controller IR blaster - not the codes from the QED remote itself

################################################## ################################
# Button names to IR code mappings
################################################## ################################
# The following codes are from a QED systemline remote mapped into a Pioneeer VCR



rew = c53ad926 # next track on wallpad
fwd = c53a59a6 # prev track on wallpad
play = c53a7986 # sent by default when the source is selected on the wallpad - and when the button is pressed again



# These are the correct buttons - but for me it works better with them switched (the wall pad only has a stop button)
# pause = c53af906
# stop = c53a19e6

# These are the switched set
stop = c53af906
pause = c53a19e6

# The power on key is useful since power_on also does 'wake on lan'
power_off = c53ab946 # this is CH- on this remote - not very useful
power = c53a39c6 # this is CH+ on this remote - and also mapped to the 'favorite' key on the wallpad



# These are the JVC codes that I didn't map - left in case someone has a remote with more buttons

# power = 0000f702
# sleep = 0000f7b3
# add = 0000f743
# repeat = 0000f7ab
# arrow_down = 0000f78b
# arrow_left = 0000f74b
# arrow_right = 0000f7cb
# arrow_up = 0000f70b
# size = 0000f703
# format = 0000f7b6
# menu_home = 0000f783
# muting = 0000c038
# muting = 0000c538
# shuffle = 0000f72b
# now_playing = 0000f7f6
# voldown = 0000c0f8
# volup = 0000c078