How do we recover the situation when we've entered '0' and Softsquueze
will no longer start, even after re-entering 8? {SlimServer 5.1.1)
Regards,
Tim
> -----Original Message-----
> From: discuss-bounces (AT) lists (DOT) slimdevices.com
> [mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of
> Richard Titmuss
> Sent: Wednesday 7 April 2004 21:38
> To: Slim Devices Discussion
> Subject: [slim] Softsqueeze v0.3
>
> Just to clarify if you are using a relased version of the
> slim server (e.g.
> 5.1.1), then you do need to enter the firmware version as
> described on the softsqueeze website. As Sean suggests,
> version number 0 will work for the nightlies. If things go
> according to plan the next release of softsqueeze won't ask
> you for a firmware version anymore, so this problem will just
> go away ...
>
> Regards,
> Richard
>
>
> ----- Original Message -----
> From: "Sean Adams" <sadams (AT) slimdevices (DOT) com>
> To: "Slim Devices Discussion" <discuss (AT) lists (DOT) slimdevices.com>
> Sent: Wednesday, April 07, 2004 8:47 PM
> Subject: [slim] Softsqueeze v0.3
>
>
> >
> > Please use 0 for the version number! Then it will never prompt for
> > upgrade.
> >
> > In fact there is no reason for softsqueeze to ask the user for the
> > firmware rev to send - it should just always be zero.
>
>
will no longer start, even after re-entering 8? {SlimServer 5.1.1)
Regards,
Tim
> -----Original Message-----
> From: discuss-bounces (AT) lists (DOT) slimdevices.com
> [mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of
> Richard Titmuss
> Sent: Wednesday 7 April 2004 21:38
> To: Slim Devices Discussion
> Subject: [slim] Softsqueeze v0.3
>
> Just to clarify if you are using a relased version of the
> slim server (e.g.
> 5.1.1), then you do need to enter the firmware version as
> described on the softsqueeze website. As Sean suggests,
> version number 0 will work for the nightlies. If things go
> according to plan the next release of softsqueeze won't ask
> you for a firmware version anymore, so this problem will just
> go away ...
>
> Regards,
> Richard
>
>
> ----- Original Message -----
> From: "Sean Adams" <sadams (AT) slimdevices (DOT) com>
> To: "Slim Devices Discussion" <discuss (AT) lists (DOT) slimdevices.com>
> Sent: Wednesday, April 07, 2004 8:47 PM
> Subject: [slim] Softsqueeze v0.3
>
>
> >
> > Please use 0 for the version number! Then it will never prompt for
> > upgrade.
> >
> > In fact there is no reason for softsqueeze to ask the user for the
> > firmware rev to send - it should just always be zero.
>
>
Comment