PDA

View Full Version : WEP Problems



Rod Savard
2004-03-12, 18:09
I agree that open key is probably "better"... but the SlimServer only
supports "shared". Not sure why it didn't work when you tried it.

-Rod
________________________________________
From: discuss-bounces (AT) lists (DOT) slimdevices.com
[mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of Charles Stanton
Sent: Friday, March 12, 2004 4:30 PM
To: discuss (AT) lists (DOT) slimdevices.com
Subject: [slim] WEP Problems

I think I need help/ suggestions on getting WEP to work. Here is my setup
and what I tried:

Access Point is Cisco 350 Series, set to 128- bit static WEP, Open key, with
encryption mandatory. Other devices ‘talk’ to it with no problems with
these settings. No luck on the Squeezebox. I input the HEX WEP key
numerous times into the squeezebox to make sure it was entered properly. To
further verify I had the key right, I reconfigured another client with the
key and it took. I don’t think it is a matter of inputting an erroneous
key.

Next, I tried to allow Shared key on the AP, in addition to Open key. No
luck. Then I tried no Open and only Shared. No luck. (I would like to
only use Open key).

Then I set encryption to ‘optional’ (not mandatory) on the AP and set the
squeezebox to no encryption and it did come up. This would be ok, except
that some of the other wireless clients don’t like this ‘optional’ setting
and drop off the network – and they require encryption (ie, it will not work
to turn off encryption on the AP).

I must be missing something. I believe these are fairly standard settings.
Any help would be greatly appreciate.