PDA

View Full Version : Squeezebox SP-DIF parameters



Mike Reeve
2004-02-27, 11:19
Patrick (Lim) et al.

The fix in the 17 February nightly will probably solve
Your DAC locking problems ...

Mike



>Sean
>
>GREAT JOB ? MANY THANKS!
>
>And thanks also for the quick fix to the PCM frequency!
>[I can now remove the ASRC in the chain between the Squeezebox & the DAC
>:-)]
>
>Regards
>
>Mike


>From: Sean Adams <sadams at slimdevices.com>
>Reply-To: Slim Devices Discussion <discuss at lists.slimdevices.com>
>Date: Tue, 17 Feb 2004 08:00:27 -0800
>To: Slim Devices Discussion <discuss at lists.slimdevices.com>
>Subject: [slim] Digital Output - Output zero-level signal when box is on
but not playing ...
>
>
>Mike,
>
>Please try the latest nightly release - this is fixed now. Please let
>me know how it works for you. Also 44.1KHz sample rate is corrected
>(was 44.19, now 44.10). Also, inverted gain is corrected.
>
>http://www.slimdevices.com/downloads/nightly/latest/
>
>Press and hold "brightness" after installing to get the updated firmware.
>
>
>On Feb 16, 2004, at 1:12 PM, Mike Reeve wrote:
>
>>
>> Sean
>>
>> THANKS for the quick reply but ...
>>
>> I am using my Squeezebox to play uncompressed PCM (AIFF) from my iTunes
library
>> (SlimServer v5.1, Squeezebox Firmware v7).
>>
>> As soon as play stops the DAC that the Squeezebox is connected to
>> indicates that it has lost input lock,
>> which says to me that the Squeezebox is not outputting digital zero
>> even in PCM mode ...
>>
>> But as you seem to be aware of the issue,
>> and its importance to us 'audiophiles' who have adopted the Squeezebox,
>> I'm sure that it will be fixed in a future release :-)
>>
>> Warm regards
>>
>> Mike