PDA

View Full Version : Squeezebox firmware problem



Tim Urbanz
2004-01-02, 15:08
I am currently running SlimServer 5.0.3 (12/28 version) running on Windows XP. The firmware web interface responds back that the update was successful. However, as mentioned in my first note, the Squeezebox illuminates a msg stating upgrade failed.

I have also tried updating the firmware from another XP box on my network, with various 5.x builds (from released to latest nightly build) of the SlimServer software. Same result. So here I sit with a dead Squeezebox! By copy to support, let me know what additional information I might provide to help resolve this problem...

Tim

Sean Adams <sadams (AT) slimdevices (DOT) com> wrote:

Tim,

It has been reported that the firmware update does not work from
windows 98. It is also possible that the firmware update image file is
corrupted or missing in your installation. Do you have a way of trying
the update from a different computer?

Also are (or have you) run a nightly build versions, or is this with a
released version?

If this doesn't help, please contact support (AT) slimdevices (DOT) com

Sean


On Jan 1, 2004, at 7:25 PM, Tim Urbanz wrote:

> I seem to be having some difficutly with the firmware on my new
> Squeezebox. I pressed the BRIGHTNESS button for 5 seconds and was
> returned a message stating I needed to connect to a wired network to
> continue with the update. So, I connected the Squeezebox to my wired
> network. I then receive the message that the Squeezebox is ready to
> continue the update and assigns address 192.168.1.50.
>
> Following the instructions from the FAQ page on updating firmware (in
> the text below), the next message posted on my Squeezebox is that the
> upgrade failed. I cannot exit out of this state...hence, the my
> Squeezebox is inoperable. Any advice on how to resolve this problem
> would be greatly appreciated...
>
> Tim
>
> I'm having trouble upgrading the firmware on Squeezebox. Do you have
> any hints?
>
> If Squeezebox is connected to the SlimServer software, you can press
> and hold the BRIGHTNESS button on the remote for 5 seconds to start
> the upgrade process.
>
> If the firmware upgrade failed and the display reads "Ready to update
> this Squeezebox" and indicates the IP address for the player, then you
> can open up this URL:http://localhost:9000/firmware.html. This page
> will have a place for you to enter the IP address displayed on
> Squeezebox. Click Submit to begin the upgrade process.
>
>
>
>
>

dean
2004-01-02, 15:14
Tim,

What is the exact message that is displayed?

-dean

On Jan 2, 2004, at 2:08 PM, Tim Urbanz wrote:

> I am currently running SlimServer 5.0.3 (12/28 version) running on
> Windows XP. The firmware web interface responds back that the update
> was successful. However, as mentioned in my first note, the
> Squeezebox illuminates a msg stating upgrade failed.
>
> I have also tried updating the firmware from another XP box on my
> network, with various 5.x builds (from released to latest nightly
> build) of the SlimServer software. Same result. So here I sit with a
> dead Squeezebox! By copy to support, let me know what additional
> information I might provide to help resolve this problem...
>
> Tim
>
> Sean Adams <sadams (AT) slimdevices (DOT) com>wrote:
>
> Tim,
>
> It has been reported that the firmware update does not work from
> windows 98. It is also possible that the firmware update image file is
> corrupted or missing in your installation. Do you have a way of trying
> the update from a different computer?
>
> Also are (or have you) run a nightly build versions, or is this with a
> released version?
>
> If this doesn't help, please contact support (AT) slimdevices (DOT) com
>
> Sean
>
>
> On Jan 1, 2004, at 7:25 PM, Tim Urbanz wrote:
>
> > I seem to be having some difficutly with the firmware on my new
> > Squeezebox. I pressed the BRIGHTNESS button for 5 seconds and was
> > returned a message stating I needed to connect to a wired network to
> > continue with the update. So, I connected the Squeezebox to my wired
> > network. I then receive the message tha! t the Squeezebox is ready
> to
> > continue the update and assigns address 192.168.1.50.
> >
> > Following the instructions from the FAQ page on updating firmware (in
> > the text below), the next message posted on my Squeezebox is that the
> > upgrade failed. I cannot exit out of this state...hence, the my
> > Squeezebox is inoperable. Any advice on how to resolve this problem
> > would be greatly appreciated...
> >
> > Tim
> >
> > I'm having trouble upgrading the firmware on Squeezebox. Do you have
> > any hints?
> >
> > If Squeezebox is connected to the SlimServer software, you can press
> > and hold the BRIGHTNESS button on the remote for 5 seconds to start
> > the upgrade process.
> >
> > If the firmware upgrade failed and the display reads "Ready to update
> > this Squeezebox" and indicates the IP address for the player, then
> you
> > can op! en up this URL:http://localhost:9000/firmware.html. This page
> > will have a place for you to enter the IP address displayed on
> > Squeezebox. Click Submit to begin the upgrade process.
> >
> >
> >
> >
> >