PDA

View Full Version : Problem with login via CLI



malgre
2006-01-27, 04:08
I'm unable to login successfully via the CLI when SlimServer has Password Protection enabled. I'm using the command:
login malgre test
i.e. username = malgre and password = test. This login works OK via the web interface.
The server responds with:
login malgre ******
but then immediately drops the connection.

I've enabled d_cli and this produces the output below. Is there something I'm doing wrong? If not, I'll log it as a bug.

Malcolm

2006-01-27 10:55:08.0256 CLI: Accepted connection from 192.168.0.50:3698 (1 active connections)
2006-01-27 10:55:09.8880 CLI: Parsing command: Found command, value [login]
2006-01-27 10:55:09.8881 CLI: Parsing command: Found param [1], value [malgre]
2006-01-27 10:55:09.8881 CLI: Parsing command: Found param [2], value [System.Byte[]]
2006-01-27 10:55:09.8881 CLI: Processing command [login]
2006-01-27 10:55:09.8883 CLI: Response: login malgre ******
2006-01-27 10:55:09.8884 CLI: Sending response...
2006-01-27 10:55:09.8885 CLI: No more messages to send to 192.168.0.50:3698
2006-01-27 10:55:09.8887 CLI: Closed connection with 192.168.0.50:3698 (0 active connections)