PDA

View Full Version : How to check the mac address of wireless lan card in SB2?



mwpmo
2005-09-10, 08:55
How to check the mac address of wireless lan card in SB2?

Cause I used mac address filter in my wireless access point.

MrC
2005-09-10, 08:58
There's player info under Settings->Information. Scroll through the lines. Also see the bottom of your SB2. Be sure the two are the same.

Yes, you can use MAC filtering on your AP. Its possiible, due to a known firmware bug that the MAC address was corrupted. I'm presuming that's what you are asking about.

dean
2005-09-10, 09:04
Turn it over and look at the bottom of the player.

On Sep 10, 2005, at 8:55 AM, mwpmo wrote:

>
> How to check the mac address of wireless lan card in SB2?
>
> Cause I used mac address filter in my wireless access point.
>
>
> --
> mwpmo
>

mwpmo
2005-09-10, 10:08
Thanks a lot for you quick response!

I thought the macx address at the bottom is the mac address of the ethenet lan card only, no the mac address of the wireless lan card.

Is that's means they have the same mac address?

dean
2005-09-10, 10:25
Yes, they do share a MAC address, which is the correct behavior if it
acts as a bridge.


On Sep 10, 2005, at 10:08 AM, mwpmo wrote:

>
> Thanks a lot for you quick response!
>
> I thought the macx address at the bottom is the mac address of the
> ethenet lan card only, no the mac address of the wireless lan card.
>
> Is that's means they have the same mac address?
>
>
> --
> mwpmo
>