PDA

View Full Version : network topology (a little OT)



Carl Maskelyne
2005-01-27, 09:34
Sounds like good advice - the switch in effect gives double the speed of a
hub because of way it handles data traffic.

For the difference in cost it may be worth considering a Gigabit switch.
Although this does not make much difference for internet browsing, network
games, etc it does make a huge difference when you are using software to
access MP3 files or moving lots of files around.

For example a reload of my 37000 odd mp3 tracks into musicmatch use to take
all night. Now it takes a couple of hours at most.

Regards,

Carl Maskelyne
PaperPak Systems IT Manager
InTouch Telephone : 0800 597 5009
Mobile Telephone : 07971 659494



This email and any attachments are confidential and intended for the
addressee only. If you are not the named recipient, you must not use,
disclose, reproduce, copy or distribute the contents of this communication.
If you have received this in error, please contact the sender and then
delete this email from your system.


-----Original Message-----
From: JJ [mailto:jj (AT) zolx (DOT) com]
Sent: 26 January 2005 22:08
To: Slim Devices Discussion
Subject: [slim] network topology (a little OT)

It really doesn't make a lot of difference, but for simplicity sake I'd
get the 16 port 10/100 switch and plug it into the LinkSys. Then plug all
your equipment into that switch and forget that the LinkSys has a switch.

The 10/100 switch will have greater bandwidth than the hubs, but for the
typical home network it's not likely to make a difference, except maybe
where you had a 10 Mbit hub as bottleneck between two pieces of equipment
doing large file transfers.

Make sure you understand whether you need to use a crossover ethernet
cable for the LinkSys-to-Switch connection. Many switches have an uplink
port that is already crossed over and some can also detect whether the
connection is to another switch and cross it over internally.


----- Original Message -----
From: "thnmnt" <thnmnt (AT) hotmail (DOT) com>
To: "Slim Devices Discussion" <discuss (AT) lists (DOT) slimdevices.com>
Sent: Wednesday, January 26, 2005 1:56 PM
Subject: [slim] network topology (a little OT)


> trying to redo my netowork. currently i've got a router and lots of
> daisychained hubs, one of which fried in a freak vaccuuming incident (i
> don't want to talk about it). i'm wondering if i should get a 16 port
> switch
> (in lieu of the hubs) to plug into one of the ports of my linksys 4 port
> router. is this the way to go? should i use the other 3 ports in this
> router
> also or just use the switch? i've got 10 pieces of gear including 2
> squeezeboxen that need to go into wired ports. also, i tend to take in
> computers like some people take in cats, so i'm sure i'll need the
> expansion
> room. any suggestions? my router is one of those linksys wireless g
> ap/router things and i've also got a dedicated 802.1b ap for my wireless
> squeezebox.
>
> ever since 'the incident' my network just hasn't been it's plucky self.
>
> --t
>
>
>