PDA

View Full Version : just for fun



jonono
2019-05-31, 00:18
so, i have 1 Raspberry with 7" Display in my Bathroom, 1 Touch in my living Room and 2 Radios for my children. I have 2 Radios and 1 Touch as Spareparts :-) and just for fun i build this one:

Raspberry pi, 7" Touchdisplay, Hifiberry miniamp and one Flirc.

I only want to see, if all runs as i want. The only Problem is the Display, i think i will build the next one with a display in front and not at top. Unfortunatly the Loudspeaker are to big to bring it with the display in one line. So it would be 500 mm large, and this is to large for me. So i need smaler loudspeaker or the display over the loudspeaker.

27463

bakker_be
2019-05-31, 01:26
You could leave it on top, but put some kind of wedges underneath the short sides so it's angled towards the user.

DJanGo
2019-05-31, 01:30
The only Problem is the Display, i think i will build the next one with a display in front and not at top.
try to mirror the display and put a real mirror @ the Top of your case ;-)

edwin2006
2019-05-31, 02:46
Make speakers taller and use that space to angle the display to listener and store PSU etc

jonono
2019-06-04, 00:38
I found the loudspeaker on amazon-warehouse deals for 5 for both :-). That is the reason why they are there. They have a really good sound and so i think i will not change it.
I think i change the case, so that on top is the first loudspeaker, in the middle is the display and on the bottom the next loudspeakter. I will build a new case :-) The sound is really great.