PDA

View Full Version : Problems Re/installing



patrick31698
2018-02-06, 12:00
hi there,
i cant get Jivelite back working .-(


[ INFO ] Downloading Jivelite from Ralphy's repository...

[ INFO ] Downloading will take a few minutes. Please wait...

[ ERROR ] not available in repository, try again later!

[ INFO ] Jivelite is installed.
jivelite.tcz not found!

[ INFO ] Downloading VU Meters from Ralphy's repository...

[ INFO ] Installing default VU Meter...
VU_Meter_Kolossos_Oval.tcz not found!

[ INFO ] Backing up files to /mnt/mmcblk0p2/tce/mydata.tgz/-\ Done.

[ OK ] Backup successful.

[ INFO ] A reboot is needed in order to finalize!


Tue Feb 6 19:58:43 CET 2018
#########################
# Edit the variables below to setup a wifi based system without LAN access
# Change Wifi to "on". Valid options for Encryption are "WEP", "WPA" or "OPEN"
WIFI="off"
SSID="wireless"
PASSWORD="******"
ENCRYPTION="WPA"
# End Wifi setup
##########################
NAME="piCorePlayer"
OUTPUT="hw:CARD=ALSA"
ALSA_PARAMS="80:::1"
BUFFER_SIZE=""
_CODEC=""
XCODEC=""
PRIORITY=""
MAX_RATE=""
UPSAMPLE=""
MAC_ADDRESS=""
SERVER_IP=""
LOGLEVEL=""
LOGFILE=""
DSDOUT=""
VISUALISER="yes"
CLOSEOUT=""
UNMUTE=""
ALSAVOLUME=""
OTHER=""
AUDIO="Analog"
HOST="piCorePlayer"
TIMEZONE="CET-1CEST,M3.5.0,M10.5.0/3"
OVERCLOCK="NONE"
ADVOVERCLOCK="None"
CMD="Default"
FIQ="0xF"
ALSAlevelout="Default"
ALSAeq="no"
REBOOT="Disabled"
RB_H="0"
RB_WD="*"
RB_DMONTH="*"
RESTART="Disabled"
RS_H="0"
RS_WD="*"
RS_DMONTH="*"
CRON_COMMAND=""
AUTOSTARTLMS=""
A_S_LMS="Disabled"
AUTOSTARTFAV=""
A_S_FAV="Disabled"
USER_COMMAND_1=""
USER_COMMAND_2=""
USER_COMMAND_3=""
JIVELITE="yes"
SCREENROTATE="no"
SHAIRPORT="no"
LMSERVER="no"
LMSDATA="default"
MOUNTPOINT=""
MOUNTUUID="no"
NETMOUNT1POINT=""
NETMOUNT1="no"
NETMOUNT1IP=""
NETMOUNT1SHARE=""
NETMOUNT1FSTYPE=""
NETMOUNT1USER=""
NETMOUNT1PASS=""
NETMOUNT1OPTIONS=""
SQLT_VERSION="basic"
SQUEEZELITE="yes"
POWER_GPIO=""
POWER_OUTPUT="L"
POWER_SCRIPT=""
IR_LIRC="no"
IR_GPIO_IN="25"
IR_GPIO_OUT=""
IR_DEVICE="lirc0"
IR_CONFIG=""
LMSWEBPORT=""
FSM="Default"
LMSCONTROLS="yes"
PLAYERTABS="yes"
HDMIPOWER="on"
RPI3INTWIFI="on"
SAMBA="disabled"
WOL="no"
WOL_NIC=""
WOL_LMSMACADDRESS=""
SPARAMS1=""
SPARAMS2=""
SPARAMS3=""
SPARAMS4=""
SPARAMS5=""

Greg Erskine
2018-02-07, 03:10
hi patrick31698,

I have loaded jivelite today so I know it was working earlier today.

It looks like you have a network issue, either internally or the internet is not available for some reason.

Select [ Main Page ] in [ Beta] mode > [ Diagnostics ] > [ Raspberry Pi ], scroll to bottom of page. Is Internet and sourceforge OK?

regards
Greg

patrick31698
2018-02-07, 05:04
Maybe that the actuall log is from some of my attempts.
But Wifi is up (can listen to Radiostreams)

patrick31698
2018-02-09, 08:22
24508

patrick31698
2018-02-09, 08:31
c@piCorePlayer:~$ ping -c 10 sourceforge.net
PING sourceforge.net (216.34.181.60): 56 data bytes
64 bytes from 216.34.181.60: seq=0 ttl=238 time=134.479 ms
64 bytes from 216.34.181.60: seq=1 ttl=238 time=128.067 ms
64 bytes from 216.34.181.60: seq=2 ttl=238 time=128.570 ms
64 bytes from 216.34.181.60: seq=3 ttl=238 time=127.926 ms
64 bytes from 216.34.181.60: seq=4 ttl=238 time=127.345 ms
64 bytes from 216.34.181.60: seq=5 ttl=238 time=125.585 ms
64 bytes from 216.34.181.60: seq=6 ttl=238 time=127.898 ms
64 bytes from 216.34.181.60: seq=7 ttl=238 time=133.638 ms
64 bytes from 216.34.181.60: seq=8 ttl=238 time=128.000 ms
64 bytes from 216.34.181.60: seq=9 ttl=238 time=128.070 ms

--- sourceforge.net ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max = 125.585/128.957/134.479 ms

ralphy
2018-02-10, 04:50
hi there,
i cant get Jivelite back working .-(


[ INFO ] Downloading Jivelite from Ralphy's repository...

[ INFO ] Downloading will take a few minutes. Please wait...

[ ERROR ] not available in repository, try again later!

[ INFO ] Jivelite is installed.
jivelite.tcz not found!


You must be using an old version of picoreplayer.

My sourceforge repository has been broken for many months now and SF insists there's no problem.

You'll have to upgrade to pcp v3.22 to get jivelite working again.

patrick31698
2018-02-10, 04:56
I already tried to update.
But this doesnot work 24509

Man in a van
2018-02-10, 15:13
A fresh install is probably your best bet.
Or try the hotfix first and then upgrade.


Before you get to excited about the last improvement, We need to make you aware that the images for piCoreplayer 3.11 and prior used a 25MB boot partition. With the new kernel and overlays piCoreplayer3.20 uses all but 200k (99%) of this space. piCorePlayer 3.20 images will increase to a 32MB boot partition to hopefully future proof that for a while.

The inplace upgrade will not be offered for the beta phase, but we will make it available at the time of the release. There will be a hotfix needed to make this available.....we will post that fix later.
The betas can be downloaded here.
piCorePlayer 3.20 beta (https://sourceforge.net/projects/picoreplayer/files/beta/piCorePlayer3.20beta5/)
The team
Paul, Greg, Ralphy and Steen



ronnie