PDA

View Full Version : Wireless interference? Or problem with SB?



Dan Goodinson
2004-11-26, 02:29
Mark,

Stephen is logging on "d_protocol" - I'm going to turn mine on over the
weekend, too, to see if I get same output as Stephen after a reboot.
e.g.:

"2004-11-21 23:25:34.3087 Got discovery request, deviceid = 2, revision
= 2.8, MAC = 00:04:20:05:76:ff 2004-11-21 23:25:34.3088 It's a
squeezebox 2004-11-21 23:25:34.3090 calculated <servername>"

Dan.

-----Original Message-----
From: discuss-bounces (AT) lists (DOT) slimdevices.com
[mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of Mark Bennett
Sent: 26 November 2004 08:36
To: Slim Devices Discussion
Subject: [slim] Wireless interference? Or problem with SB?


OK, now I've had a new DHCP lease, after three days of continuous
playing. I have no idea if it was due to a reboot or not since I was at
work so wasn't around to see it.

Is there a log setting for SlimServer which will log
such reconnects?


On Wed, 2004-11-24 at 08:15, Mark Bennett wrote:
> Still running, no new DHCP lease......
>
>
> On Tue, 2004-11-23 at 21:01, Mark Bennett wrote:
> > OK, so I have the following:
> >
> > SSID - 13 characters, all alpha, mix of upper and lower case SSID
> > Broadcast - Disabled Channel - 11 (NOT dynamic)
> > Authentication - WEP Shared key
> > Wep Key - 128 bit
> >
> > Everything else wireless related is as per the defaults: Beacon
> > Interval - 100 DTIM interval - 3
> > Dot11 Mode - Mixed
> > TXRates - auto
> > Turbo Mode - Enabled
> > Frame Bursting - Enabled
> >
> > I have a MAC filter setup with just known MAC's allowed (this does
> > not include the router itself).
> >
> > Just about everything else, except my PP0E connection
> > is just the defaults.....
> >
> > Hope this helps, but I suspect it won't.
> >
> > Let me know if there's anything else I can do on this.
> >
>
>
>

Mark Bennett
2004-11-27, 01:33
OK, I'm now logging d_protocol and I'll see what happens.

Unfortunately NetStumbler doesn't support my laptop network
card, so I can't use it to see if there are any other
networks around.

However, the site survey utility that comes with my card
can't seem to find any (not sure how good it is though).

On Fri, 2004-11-26 at 09:29, Dan Goodinson wrote:
> Mark,
>
> Stephen is logging on "d_protocol" - I'm going to turn mine on over the
> weekend, too, to see if I get same output as Stephen after a reboot.
> e.g.:
>
> "2004-11-21 23:25:34.3087 Got discovery request, deviceid = 2, revision
> = 2.8, MAC = 00:04:20:05:76:ff 2004-11-21 23:25:34.3088 It's a
> squeezebox 2004-11-21 23:25:34.3090 calculated <servername>"
>
> Dan.
>
> -----Original Message-----
> From: discuss-bounces (AT) lists (DOT) slimdevices.com
> [mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of Mark Bennett
> Sent: 26 November 2004 08:36
> To: Slim Devices Discussion
> Subject: [slim] Wireless interference? Or problem with SB?
>
>
> OK, now I've had a new DHCP lease, after three days of continuous
> playing. I have no idea if it was due to a reboot or not since I was at
> work so wasn't around to see it.
>
> Is there a log setting for SlimServer which will log
> such reconnects?
>
>
> On Wed, 2004-11-24 at 08:15, Mark Bennett wrote:
> > Still running, no new DHCP lease......
> >
> >
> > On Tue, 2004-11-23 at 21:01, Mark Bennett wrote:
> > > OK, so I have the following:
> > >
> > > SSID - 13 characters, all alpha, mix of upper and lower case SSID
> > > Broadcast - Disabled Channel - 11 (NOT dynamic)
> > > Authentication - WEP Shared key
> > > Wep Key - 128 bit
> > >
> > > Everything else wireless related is as per the defaults: Beacon
> > > Interval - 100 DTIM interval - 3
> > > Dot11 Mode - Mixed
> > > TXRates - auto
> > > Turbo Mode - Enabled
> > > Frame Bursting - Enabled
> > >
> > > I have a MAC filter setup with just known MAC's allowed (this does
> > > not include the router itself).
> > >
> > > Just about everything else, except my PP0E connection
> > > is just the defaults.....
> > >
> > > Hope this helps, but I suspect it won't.
> > >
> > > Let me know if there's anything else I can do on this.
> > >
> >
> >
> >