Activity Stream

Hi, so it looks that I have been lucky enough to get two SqueezeAMPs by postal delivery in good shape, the envelope was also torn but repaired...

I've already looked at that, but seeing the latest delivery, i though it was obsolete compared to picoreplayer which is still delivering new content.

The "soft" finish which was used on the lower panel of Touch, some SB remote and Boom - deteriorates with time - I don't think use of any cleaner is...

Hi, If you look under General Discussion, I submitted the same problem, under the above title. There were suggestions on how to tackle the...

No, not natively. But when you use the bridge’s transcode option, then it applies the replay gain for the CC

In the post above the user says that ChromeCast supports Replaygain. It didn't use to use to. Is it true it does now? Thanks.

Thanks to both of you. At this point @chill has kindly offered to be the EU contact point and as he also makes the acrylic boxes, it makes sense that...

The helper needs to access LMS using the Command Line Interface (CLI) to gather metadata and then forward them to the CC. When you set a password,...

First, I'm thrilled with Chromecast Bridge because it finally gives me a way to cast replaygained, (relatively), lossless files to CC devices....

Ok. Then I will try it. If I install it on Raspbian directly and not via piCorePlayer, I think I will have to do the LMS configuration (the one page...

FWIW I ended up going with the Allo USBridge Signature (rather than a RPi 4) and a Shanti LPSU - expect them to arrive in the next week. I actually...

I'm tempted but as it's going to be probably a non-trivial effort, I'll wait a bit to see if there is enough interest generated by the project. I...

Unfortunately that will probably be more complicated than just eating the cost

Hello! I am using a Pi 3B+ with the 7" Display, a Hifiberry DAC+ Pro and an USB SSD in a SmartiPi Case with piCorePlayer and activated LMS, so I...

Yeah the 128 sounds good on my SB3. The content is exceptionally well curated, have not found Jazz channel I’ve liked nearly as well. Their fund...

I really don’t know. Have you tried to enable encryption in the plugin settings? That the only cause that comes to mind if all is working fine except...

I looked for a similar case in the forum, but found nothing. All my attempts to use the new speaker with the bridge fail. (My two old speakers, with...

definitely, unless one has COMPILATION = 1 and/or ALBUMARTIST set to same value for all tracks.

The later units are UL approved. I guess that's why some changes were made.

One more point I remember: some of the track-level tags are important too, e.g. if you have a track with a different artist, that can mess up the...

Sorry forgot about that one....USB devices do have a rather large list of potential output devices. And not all of them work.

Thanks Paul, I figured it out eventually, I had to also set the correct output setting, which in my case were as follows, all seems to be working as...

Thanks for the answer, it really helps Ouch, that's going to hurt. On such esp32 systems, there is 4 to 8MB of flash and 4MB of SRAM of which...

That's shocking and pretty sad, who were the delivery company? Possible compensation claim? Kev

If you have a look around you'll find https://github.com/marcoc1712/squeezelite-R2/releases Ralphy's squeezelite version is also compatible if you...

Might be worth asking Allo if it's compatible. I don't know anything about that DAC.

That part is perfectly normal. Most headphones/speakers will only try to connect on when you power them on. The part that Is unusual is that you...

I have just created a fresh system only with squeezelite. Nothing has been changed. If my hadphone is switch off and then switched on again, it is...

I was going to suggest putting a "Fragile" label on it but they might use those for better targetting. I just tried putting it through my...

I still haven't been able to get any sound via the built in usb port connected directly to my NAD D 3020!!