I have just bought a Contoller to use with my SBT . I have been able to get the Controller connected to my Network and the SBT and I can control the SBT . However I am not able to get the controller on its own to output any sound via the head phoe socket .
Whatever I choose to play shows on the screen but no sound comes from the controller . I am also not able to get the controller to connect with squeezebox.com but it does connect to the SBT .
Results 1 to 10 of 12
Thread: Duet Controller used with SBT
-
2012-06-13, 03:30 #1Junior Member
- Join Date
- Mar 2012
- Posts
- 29
Duet Controller used with SBT
-
2012-06-13, 04:24 #2Senior Member
- Join Date
- May 2008
- Location
- United States
- Posts
- 8,173
in the controller go to: SETTINGS > ADVANCED > BETA FEATURES > Audio Playback, then activate the playback.
regarding getting mysb.com connection, I'm not sure, but it seems that you can do a factory reset on the Controller and it should ask you for your mysb.com credentials....Location 1: VortexBox Appliance 6TB (2.2) > LMS 7.7.2 > Transporter, Touch, Boom, Radio w/Battery (all ethernet)
Location 2: VBA 3TB (2.2) > LMS 7.7.2 > Touch > Benchmark DAC I, Boom, Radio w/Battery (all ethernet except Radio)
Office: Win7(64) > LMS 7.7.2 > SqueezePlay
Spares: VBA 4TB, SB3, Touch (3), Radio (3), CONTROLLER
Controllers: iPhone4S (iPeng), iPad2 (iPengHD & SqueezePad), CONTROLLER, or SqueezePlay 7.7 on Win7(64) laptop
Ripping (FLAC) - dbpoweramp, Tagging - mp3tag, Spotify
-
2012-06-13, 06:47 #3Junior Member
- Join Date
- Mar 2012
- Posts
- 29
Thanks Gary appreciate your advice will give that a try when I get home tonight. I have already put the full LMS details in the Controller but despite being connected to my network it just does not seem to be able to connect.
I think this may be an issue because I have two routers . I have been looking for a while to get a decent modem router so that all my connections are in to a single unit and will do this first to see if this cures the problems.
Does it make a difference if the SBT is a wired ethernet connection while the Controller can only be Wireless ?
-
2012-06-13, 06:52 #4Senior Member
- Join Date
- May 2008
- Location
- United States
- Posts
- 8,173
the SBT can be wired and the controller wifi. no problem. But they do both need to be on the SAME network. If you have two routers, make sure the DHCP server is turned off in one of them. You don't want two routers both handing out IP addresses.
Make sure on same network (maybe turn off one of the routers temporarily), then do a factory reset on the CONTROLLER.Location 1: VortexBox Appliance 6TB (2.2) > LMS 7.7.2 > Transporter, Touch, Boom, Radio w/Battery (all ethernet)
Location 2: VBA 3TB (2.2) > LMS 7.7.2 > Touch > Benchmark DAC I, Boom, Radio w/Battery (all ethernet except Radio)
Office: Win7(64) > LMS 7.7.2 > SqueezePlay
Spares: VBA 4TB, SB3, Touch (3), Radio (3), CONTROLLER
Controllers: iPhone4S (iPeng), iPad2 (iPengHD & SqueezePad), CONTROLLER, or SqueezePlay 7.7 on Win7(64) laptop
Ripping (FLAC) - dbpoweramp, Tagging - mp3tag, Spotify
-
2012-06-13, 07:03 #5Junior Member
- Join Date
- Mar 2012
- Posts
- 29
Gary think this may well be my problem and as I said I am going to buy a new Modem Router that will have all my connections on that one router. Will wait until I get that installed then do a complete factory reset on both the SBT and Controller then put a new clean install of LMS 7.2 on my pc and then clear the cache and Library and do a rescan and start the whole thing from scratch . I know it is a bit of a pain but should give me the best chance of getting a nice new installation with all the units connected to the same network .
-
2012-06-13, 07:06 #6
When you want to play music through the SBC headphone jack, the SBT is completely irrelevant.
When you enable Audio playback on the Controller, the Controller will show up in LMS as a separate Squeezebox player. In other words, you will have two Squeezeboxes; the Touch and the Controller. You can play one song on the SBT while simultaneously playing a different one on the SBC if you like.
-
2012-06-13, 07:15 #7Junior Member
- Join Date
- Mar 2012
- Posts
- 29
This is my problem although the controller is on the mysqueezebox.com page it does not show up as connected . Also if I open the LMS window and look at the Tab Information it only shows the number of players connected as 1. Given that the controller can find and connect with the SBT then as above i suspect a network issue which I hope will be resolved when I have a single modem router with everything just connected to that .
-
2012-06-13, 07:25 #8Senior Member
- Join Date
- May 2008
- Location
- United States
- Posts
- 8,173
Hmmmm, You may not understand that if the CONTROLLER is connected to your local LMS, it is correct that it shows up as "non connected" to your mysqueezebox.com. A player can be connected to either your local LMS or mysqueezebox.com, but not both at the same time. Within the CONTROLLER menu, you need to choose, "select player" and select the Controller as player before you get to use it as a player (as noted above).
Location 1: VortexBox Appliance 6TB (2.2) > LMS 7.7.2 > Transporter, Touch, Boom, Radio w/Battery (all ethernet)
Location 2: VBA 3TB (2.2) > LMS 7.7.2 > Touch > Benchmark DAC I, Boom, Radio w/Battery (all ethernet except Radio)
Office: Win7(64) > LMS 7.7.2 > SqueezePlay
Spares: VBA 4TB, SB3, Touch (3), Radio (3), CONTROLLER
Controllers: iPhone4S (iPeng), iPad2 (iPengHD & SqueezePad), CONTROLLER, or SqueezePlay 7.7 on Win7(64) laptop
Ripping (FLAC) - dbpoweramp, Tagging - mp3tag, Spotify
-
2012-06-13, 07:31 #9Junior Member
- Join Date
- Mar 2012
- Posts
- 29
m
Yes I can see that but when you search for a player it only shows the SBT it does not show the controller which points to the network issue in that the controller is not connecting to mysqueezebox.com .
I think you have been very patient and helpful and thank you for your time. I think it best now if I install the new single router and connect everything up then see what happens . It may well be that with no further input this all gets resolved and I will be able to get a full network system of SBT and Controller working . If so then will come back and post the result. (possibly not tomorrow as watching the UK passion of football and the Euro 2012 tonight , again ) but will come back when things have been changed. If there is still a problem will try and out line it with more detail to help anyone identify the issues.
-
2012-06-13, 07:42 #10Senior Member
- Join Date
- May 2008
- Location
- United States
- Posts
- 8,173
I agree that it can't hurt to get your network fully straightened out so that we know that is not an issue.
(p.s. it may be that your "select player" is not choosing your Controller because your controller is not yet setup as a PLAYER with the SETTINGS > ADVANCED > BETA Features > playback. But I'm not sure about this.
by the way, the controller as a player is not that great (why it is beta and was never pursued...in fact, I'm told that later version of the CONTROLLER didn't even have the option to turn on this beta feature). You can do much better by using either iPeng (on an itouch or ipad) or SqueezePad (on ipad), or various android apps to treat these smart phones as portable SB "players".Location 1: VortexBox Appliance 6TB (2.2) > LMS 7.7.2 > Transporter, Touch, Boom, Radio w/Battery (all ethernet)
Location 2: VBA 3TB (2.2) > LMS 7.7.2 > Touch > Benchmark DAC I, Boom, Radio w/Battery (all ethernet except Radio)
Office: Win7(64) > LMS 7.7.2 > SqueezePlay
Spares: VBA 4TB, SB3, Touch (3), Radio (3), CONTROLLER
Controllers: iPhone4S (iPeng), iPad2 (iPengHD & SqueezePad), CONTROLLER, or SqueezePlay 7.7 on Win7(64) laptop
Ripping (FLAC) - dbpoweramp, Tagging - mp3tag, Spotify

Reply With Quote

