[ANNOUNCE] Squeezeslave: 1.2 released

[ralphy]

The final Squeezeslave release 1.3-393 is now available on sourceforge.

What's new in Squeezeslave 1.2-311

Output device selection by name (-n/--name)

See this post for usage details.

Updated -l/--lcd LCDd (lcdproc) option to use Priorities keywords instead of values.

Added -C/--lcdc option which uses the old values syntax.

Added -F/--discovery UDP server discovery option.

If you have more than one squeezebox server on your network, squeezeslave will connect to the first server that responds to the discovery packet.
Server discovery does not always work when your system has more than one active network interface.
You may have to continue to specify the squeezebox server name on the command line.

Added -I/--findservers option to list servers found via UDP discovery and exit.

Single Windows binary for ASIO, DirectX and WASAPI.
No more separate windows binaries for each audio driver type.

Universal Mac OSX binary for ia64, i386 and ppc.
No more separate binaries for each architecture.

Support for the Rio EMPEG car player. Thanks to rpress for his contributions to squeezeslave.
The EMPEG package and required server patch are available on googlecode.
Rio EMPEG squeezeslave in action, development information and lets not forget the Vanputer!

Fixed crashing on exit when using SIGINT (Ctrl-C) on Windows.

Fixed server name truncation at 16 characters. Max length is now 256 characters.

Updated ogg library to 1.2.2.

Updated vorbis library to 1.3.2.

Source

You can browse the source here

Download it with subversion.
svn checkout http://squeezeslave.googlecode.com/svn/squeezeslave/branches/squeezeslave-1.3-393

Download in tar file format if you don't have subversion available.

View detailed code changes.

Wiki

Usage, command line options and compiling instructions are available here or use -h/--help.

[ralphy]

---- ---- ---- ---- ----

[bobkoure]

Thanks, Ralphy!

[Jaicee]

Hi I'm having some trouble getting squeezeplayer to output to the right device. I'm trying to use it on my HTPC connected to my TV via HDMI running XBMCbuntu (a cut down ubuntu distribution with a LXDE desktop that you can optionally boot to).

If I just boot straight to XBMC the hdmi audio isn't displayed by squeezeslave -L however if I boot even to the login screen where you can chose which desktop environment to load I get the expected output and I can use squeezeslave just fine. Below are the outputs of aplay -L and -l (identical in both cases) and squeezeslave -l

http://pastebin.com/TQs1LngM
http://pastebin.com/aBEydASk

Any ideas what's wrong here?

[bossanova808]

You might want to try this also:

http://forum.xbmc.org/showthread.php?p=1012231

(integrated basic controller/squeezeslave in XBMC)

[ralphy]

Hi I'm having some trouble getting squeezeplayer to output to the right device. I'm trying to use it on my HTPC connected to my TV via HDMI running XBMCbuntu (a cut down ubuntu distribution with a LXDE desktop that you can optionally boot to).

If I just boot straight to XBMC the hdmi audio isn't displayed by squeezeslave -L however if I boot even to the login screen where you can chose which desktop environment to load I get the expected output and I can use squeezeslave just fine. Below are the outputs of aplay -L and -l (identical in both cases) and squeezeslave -l

http://pastebin.com/TQs1LngM
http://pastebin.com/aBEydASk

Any ideas what's wrong here?

ALSA does not allow sharing of the physical device. Once XBMC is running it opens the device which blocks squeezeslave from "seeing" it.

[Jaicee]

You might want to try this also:

http://forum.xbmc.org/showthread.php?p=1012231

(integrated basic controller/squeezeslave in XBMC)

That's what I'm trying to use but it just interacts with the regular squeezeslave binaries. After further experimentation you are right - XBMC was keeping hold of the audio but it was doing so a bit sporadically. Turning of menu navigation sounds in XBMC fixed it.

I still get the following error when playing or even listing devices however playback still works fine.

Expression 'alsa_snd_pcm_hw_params_set_buffer_size_near( pcm, hwParams, &lowLatency )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 904
Expression 'alsa_snd_pcm_hw_params_set_buffer_size_near( pcm, hwParams, &lowLatency )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 904

[ralphy]

Try adding -y84 to the command line when starting squeezeslave.

[Jaicee]

Try adding -y84 to the command line when starting squeezeslave.

No joy with that - I've not had any dropouts or problems apart from the error message showing and I get those error lines even doing squeezebox -L

[ralphy]

No joy with that - I've not had any dropouts or problems apart from the error message showing and I get those error lines even doing squeezebox -L

That error is coming from the system alsa library.

The only thing I can suggest at the moment is to add -Y/dev/null to the command line and the error message(s) will be redirected to "bit heaven".