Hey folks, please help me with getting Inguz/DRC/ setup on my SBT!!

[TheOctavist]

alright..im going to get this done tomorrow.. gonna need some help.

what do you have, adam? acourate or?

[TheOctavist]

is there a free convolver pkg? just asking...dont want to spend the dosh unless its gonna help a lot.

if it does help,.ill pay for something nice

[Phil Leigh]

is there a free convolver pkg? just asking...dont want to spend the dosh unless its gonna help a lot.

if it does help,.ill pay for something nice

Inguz IS a free convolver...
And it is as good as it gets.
If you can get it to work, it will also do the measurements... Ther are alternatives.z

[TheOctavist]

Inguz IS a free convolver...
And it is as good as it gets.
If you can get it to work, it will also do the measurements... Ther are alternatives.z

so it does all that room correction and whatnot?

so to be clear, everything I need to get my room sorted (at least in the digital domain) is in Inguz?

[Phil Leigh]

so it does all that room correction and whatnot?

so to be clear, everything I need to get my room sorted (at least in the digital domain) is in Inguz?

In theory yes, but some ofus have found that it is better to ignore the measurement part of Inguz and use something more advanced/ powerful for that - I use Audilense to do the measurements and Inguz at playback time to do the convolution.

[totoro]

In theory yes, but some ofus have found that it is better to ignore the measurement part of Inguz and use something more advanced/ powerful for that - I use Audilense to do the measurements and Inguz at playback time to do the convolution.

Suppose one had a usb connection thingy with phantom power for a mic, a stand, and a behringer mic.

What would one need to do audiolense measurements? a laptop plugged into the stereo with the mic hooked up to it?

I did measurements with the original inguz (playing a separate sine wave sweep through each speaker while the mic recorded): is the audiolense way of doing it similar?

[adamdea]

alright..im going to get this done tomorrow.. gonna need some help.

what do you have, adam? acourate or?

Sorry TR I was offline all weekend.
I use audiolens, and went straight to it on phil's advice. I did not try using inguz itself to do the measurements.
I have only ever used the basic auiolens which is effectly just frequency domain not the xo which will also do the group delay (and crossovers if one could find a way of getting 4 channels though the pesky squeezebox).

I set this up and fiddled with it a bit for a few days and since then have left it as it is.

[TheOctavist]

I have audiolense now..

I also have downloaded DRC.

trid to use DRC, but I cant run impulse prep?? the .exe file, once clicked just flashes a DOS screen for a second, and nothing..

tried using the impulse prep .msi, but it said my LMS wasnt up to date and couldnt install(im using the latest!)

help

[totoro]

I have audiolense now..

I also have downloaded DRC.

trid to use DRC, but I cant run impulse prep?? the .exe file, once clicked just flashes a DOS screen for a second, and nothing..

tried using the impulse prep .msi, but it said my LMS wasnt up to date and couldnt install(im using the latest!)

help

You might want to try running it from the command line, and seeing what it prints to the screen.

[TheOctavist]

You might want to try running it from the command line, and seeing what it prints to the screen.

im not a command line type guy...

can you tell me how to do that?