Home of the Squeezebox™ & Transporter® network music players.
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 34

Thread: Audiolabs M-DAC

  1. #1
    Senior Member
    Join Date
    Apr 2008
    Posts
    402

    Audiolabs M-DAC

    Anyone on here lucky enough to pre-order this

    If so, anyone using it with the Touch ?

    No stock now until January.
    Squeezebox touch
    Squeezeplug running on Dockstar
    Audiolab MDAC
    Arcam A85 amp
    Chord rumour speaker cable
    Dali Mentor Menuets on Custom Design stands

    Room 2
    Boom

    Bedroom
    RADIO

  2. #2
    Senior Member sleepysurf's Avatar
    Join Date
    Apr 2005
    Location
    Tampa, FL
    Posts
    294
    I've got one on pre-order from Planet of Sound. Now just waiting to see if I made the "cut" for the initial North American shipment. Looks like a potential "killer" DAC to pair with my Touch.
    Main system: Touch > Benchmark DAC-1 > Conrad-Johnson CT-5 preamp and Premier 350 amp > ML Summits. Audience AU24e and Blue Jeans Cables. Secondary systems: SB3 in Master BR (Russound R235LS amp driving in-ceiling speaker) and Game Room (powered Swan S200A speakers), with Boom in Home Office. Member of the Suncoast Audiophile Society

  3. #3
    Senior Member
    Join Date
    Apr 2008
    Posts
    402
    Just tracked one down. It's arriving tomorrow!

    They had 2 in stock 1 black and 1 silver
    Squeezebox touch
    Squeezeplug running on Dockstar
    Audiolab MDAC
    Arcam A85 amp
    Chord rumour speaker cable
    Dali Mentor Menuets on Custom Design stands

    Room 2
    Boom

    Bedroom
    RADIO

  4. #4
    Senior Member sleepysurf's Avatar
    Join Date
    Apr 2005
    Location
    Tampa, FL
    Posts
    294
    Lucky you! Looking forward to hearing your opinion!
    Main system: Touch > Benchmark DAC-1 > Conrad-Johnson CT-5 preamp and Premier 350 amp > ML Summits. Audience AU24e and Blue Jeans Cables. Secondary systems: SB3 in Master BR (Russound R235LS amp driving in-ceiling speaker) and Game Room (powered Swan S200A speakers), with Boom in Home Office. Member of the Suncoast Audiophile Society

  5. #5

    vs Audiolab 8200 DAC

    Is this the same DAC as the 8200 DAC/pre, but without the pre?
    GIK Acoustics Room Treatments. Tranquil PC fanless server running Windows 7; SB Touch slaved to Empirical Audio Pace Car; Mytek 192 DSD DAC;Custom Desinged Class AB control amp; Devore Gibbon 9 Speakers; Dual 506 + Ortofon M20 (occasional use); sometimes use PC with M-Audio 192 as digital source. SB Boom in second room. Arcam CD82 which I don't use anymore, even though it's a very good player.

  6. #6
    Senior Member
    Join Date
    Apr 2008
    Posts
    402
    Squeezebox touch
    Squeezeplug running on Dockstar
    Audiolab MDAC
    Arcam A85 amp
    Chord rumour speaker cable
    Dali Mentor Menuets on Custom Design stands

    Room 2
    Boom

    Bedroom
    RADIO

  7. #7
    Junior Member
    Join Date
    Nov 2011
    Posts
    5
    Hi tank,

    I am using an MDAC with a Touch - I don't think you will be disappointed :-)
    It is a joy to use, the little wand remote is great to mute or swap filter settings on the fly. I run it via XLRs straight to my power amp, using the digital pre-amp in the MDAC, and it comfortably out-performs my previous setup of DacMagic + passive pre.
    The headphone amp is also top notch - overall, the MDAC has been one of my best hi-fi purchases, and the fact that the designer, John Westlake, takes such an interest over on PFM adds to the joy of ownership !

    Just need dimmable display, which John W has indicated will be in the first user installable firmware update in a few weeks time.

    Best regards,

    George

  8. #8
    Senior Member
    Join Date
    Apr 2008
    Posts
    402
    The MDAC has arrived at work, will be setting up later!
    Squeezebox touch
    Squeezeplug running on Dockstar
    Audiolab MDAC
    Arcam A85 amp
    Chord rumour speaker cable
    Dali Mentor Menuets on Custom Design stands

    Room 2
    Boom

    Bedroom
    RADIO

  9. #9
    Senior Member
    Join Date
    Apr 2008
    Posts
    402
    Volume question.

    When setting up the DAC should be volume be set to 100% ?

    The Touch is set to 100% and then will feed into the DAC via Coaxial and from the DAC into will feed into my amp via RCA.
    Squeezebox touch
    Squeezeplug running on Dockstar
    Audiolab MDAC
    Arcam A85 amp
    Chord rumour speaker cable
    Dali Mentor Menuets on Custom Design stands

    Room 2
    Boom

    Bedroom
    RADIO

  10. #10
    Junior Member
    Join Date
    Nov 2011
    Posts
    5
    Yes, that is what is recommended in the MDAC manual, and I have it this way, Fixed volume 100% on the Touch

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •