Home of the Squeezebox™ & Transporter® network music players.
Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Jun 2011
    Posts
    18

    How to install Lame on DS 111 NAS from synology

    I'm new to using linux, but this weekend I installed ny DS111 NAS with the squeezeserver software. But now i still need to add the lame software to the server and i don't know which file to put where. With the windows versio it was just puting lame.exe in de bin folder. But which file needs to go in de Bin folder of the squeezeserver for linux?

    I'm allready at the point that I've located the server folder on my NAS using putty.

    thanks for the help

  2. #2
    Senior Member Mnyb's Avatar
    Join Date
    Feb 2006
    Location
    Vństerňs Sweden
    Posts
    16,163
    What CPU is the DS111 using, LAME may not be avaible for that platform or migth not run for performance reasons, figure the cpu type and google some moore...
    To be able to use LAME the cpu must have floiting piont unit.
    --------------------------------------------------------------------
    Main hifi: Touch + CIA PS +MeridianG68J MeridianHD621 MeridianG98DH 2 x MeridianDSP5200 MeridianDSP5200HC 2 xMeridianDSP3100 +Rel Stadium 3 sub.
    Bedroom/Office: Boom
    Kitchen: Touch + powered Fostex PM0.4
    Misc use: Radio (with battery)
    iPad1 with iPengHD & SqueezePad
    (spares Touch, SB3, reciever ,controller )
    server HP proliant micro server N36L with ClearOS Linux

    http://people.xiph.org/~xiphmont/demo/neil-young.html

  3. #3
    Senior Member
    Join Date
    Oct 2005
    Location
    Ireland
    Posts
    15,329
    An alternative to LAME for CPU without an FPU is to use Shine.

    See http://wiki.slimdevices.com/index.ph...or_transcoding

  4. #4
    Senior Member Mnyb's Avatar
    Join Date
    Feb 2006
    Location
    Vństerňs Sweden
    Posts
    16,163

    Thumbs up

    Quote Originally Posted by bpa View Post
    An alternative to LAME for CPU without an FPU is to use Shine.

    See http://wiki.slimdevices.com/index.ph...or_transcoding
    The wiki describes how to compile and use it on debian linux ?
    wich absolutely means that it will run on other linux to, if one figure out the details, on how to compile it and use it ?

    Synologys homepage does not specify cpu "1.6mhz" it could be a similar arm cpu as the shevaplug, so it it migth work
    --------------------------------------------------------------------
    Main hifi: Touch + CIA PS +MeridianG68J MeridianHD621 MeridianG98DH 2 x MeridianDSP5200 MeridianDSP5200HC 2 xMeridianDSP3100 +Rel Stadium 3 sub.
    Bedroom/Office: Boom
    Kitchen: Touch + powered Fostex PM0.4
    Misc use: Radio (with battery)
    iPad1 with iPengHD & SqueezePad
    (spares Touch, SB3, reciever ,controller )
    server HP proliant micro server N36L with ClearOS Linux

    http://people.xiph.org/~xiphmont/demo/neil-young.html

  5. #5
    Junior Member
    Join Date
    Jun 2011
    Posts
    18
    as i started this tread the first thing I mentioned was the fact that I'm new to linux. I learned this weekend to copy files from one folder to another using putty and the root login. but thats about it.

    The instruction mentioned on the wiki page isn't working the first comand says not found.
    Basically I hope that some one is gona say hare is the LAME file you need, just copy it to sbs's Bin folder and good luck with it. But I'm starting to get the impression that that is not the case. But if some one has a step by step manual, I'd be very thankfull.


    ____________________

    I found some more instructions but they don't seem to work, but it looks like I'm getting closer. Most site's metion to install de ipkg package installer as the first step. I found a ipk package for installing Lame on a DS101. But using the instruction on http://www.nslu2-linux.org/wiki/DS101/DS101BootStrap it ended in some syntax error reporting ')' is expected on line 1. So again help is eprieciated. I Als posted the question in the synology forum. So if the answer comes up, I'll post it here as well.
    Last edited by Aanbeeld; 2011-06-13 at 13:09.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •