RE: Gentoo init.d script

[Laurence Hardwick]

Guys

if you would like the script set from my Solaris install
then I can post it tomorrow. It is pretty straight forward and
not particularly rocket science, but it works.

Regards Laurence

> -----Original Message-----
> From: developers-bounces (AT) lists (DOT) slimdevices.com
> [mailto:developers-bounces (AT) lists (DOT) slimdevices.com]On Behalf Of dean
> blackketter
> Sent: 24 November 2003 20:40
> To: SlimDevices Developers
> Subject: Re: [Developers] Gentoo init.d script
>
>
> Got it.
>
> Thanks!
>
>
> On Nov 24, 2003, at 12:12 PM, Roy M. Silvernail wrote:
>
> > On Monday 24 November 2003 14:25, dean blackketter wrote:
> >> I'm about to check in this under:
> >>
> >> slim/platforms/gentoo
> >
> > Dean, there's a word-wrap glitch in the original post. I'm attaching
> > a clean
> > version.
> > <slimserver>

[Roy M. Silvernail]

On Monday 24 November 2003 16:51, Laurence Hardwick wrote:
> Guys
>
> if you would like the script set from my Solaris install
> then I can post it tomorrow. It is pretty straight forward and
> not particularly rocket science, but it works.

The more the merrier, I think. Maybe it could become a project, like the
effort to gather a "Hello, World!" program in every existing language. I can
see the bullet point now...

* When we say Slimserver runs on everything, we mean _everything_!

[dean]

That would be great!

On Nov 24, 2003, at 1:51 PM, Laurence Hardwick wrote:

>
> Guys
>
> if you would like the script set from my Solaris install
> then I can post it tomorrow. It is pretty straight forward and
> not particularly rocket science, but it works.
>
> Regards Laurence
>
>> -----Original Message-----
>> From: developers-bounces (AT) lists (DOT) slimdevices.com
>> [mailto:developers-bounces (AT) lists (DOT) slimdevices.com]On Behalf Of dean
>> blackketter
>> Sent: 24 November 2003 20:40
>> To: SlimDevices Developers
>> Subject: Re: [Developers] Gentoo init.d script
>>
>>
>> Got it.
>>
>> Thanks!
>>
>>
>> On Nov 24, 2003, at 12:12 PM, Roy M. Silvernail wrote:
>>
>>> On Monday 24 November 2003 14:25, dean blackketter wrote:
>>>> I'm about to check in this under:
>>>>
>>>> slim/platforms/gentoo
>>>
>>> Dean, there's a word-wrap glitch in the original post. I'm attaching
>>> a clean
>>> version.
>>> <slimserver>

[Rahul Agarwal]

I couldn't find a init.d script for Debian, so here's a modified version
of the Gentoo script submitted earlier that works for Debian
Woody/Sarge. Please read the first few lines to make sure that they are
correct for your system.

Hopefully, it will save a few minutes for Debian users .

Thanks,
--
\ `*~rahul~* `/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~
\ \|/ /
( o,o )
----oOO--------OOo----
ragarwal (AT) fit (DOT) edu

Get my public key at http://my.fit.edu/~ragarwal/tipiyano.asc

On Mon, 2003-11-24 at 19:24, dean blackketter wrote:
> That would be great!
>
> On Nov 24, 2003, at 1:51 PM, Laurence Hardwick wrote:
>
> >
> > Guys
> >
> > if you would like the script set from my Solaris install
> > then I can post it tomorrow. It is pretty straight forward and
> > not particularly rocket science, but it works.
> >
> > Regards Laurence
> >
> >> -----Original Message-----
> >> From: developers-bounces (AT) lists (DOT) slimdevices.com
> >> [mailto:developers-bounces (AT) lists (DOT) slimdevices.com]On Behalf Of dean
> >> blackketter
> >> Sent: 24 November 2003 20:40
> >> To: SlimDevices Developers
> >> Subject: Re: [Developers] Gentoo init.d script
> >>
> >>
> >> Got it.
> >>
> >> Thanks!
> >>
> >>
> >> On Nov 24, 2003, at 12:12 PM, Roy M. Silvernail wrote:
> >>
> >>> On Monday 24 November 2003 14:25, dean blackketter wrote:
> >>>> I'm about to check in this under:
> >>>>
> >>>> slim/platforms/gentoo
> >>>
> >>> Dean, there's a word-wrap glitch in the original post. I'm attaching
> >>> a clean
> >>> version.
> >>> <slimserver>

[dean]

Thanks, but I wonder if the version number is really a good thing to
have hard coded in there. Is this a typically Debian thing to do?


On Nov 24, 2003, at 5:07 PM, Rahul Agarwal wrote:

> I couldn't find a init.d script for Debian, so here's a modified
> version
> of the Gentoo script submitted earlier that works for Debian
> Woody/Sarge. Please read the first few lines to make sure that they are
> correct for your system.
>
> Hopefully, it will save a few minutes for Debian users .
>
> Thanks,
> --
> \ `*~rahul~* `/
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~
> \ \|/ /
> ( o,o )
> ----oOO--------OOo----
> ragarwal (AT) fit (DOT) edu
>
> Get my public key at http://my.fit.edu/~ragarwal/tipiyano.asc
>
> On Mon, 2003-11-24 at 19:24, dean blackketter wrote:
>> That would be great!
>>
>> On Nov 24, 2003, at 1:51 PM, Laurence Hardwick wrote:
>>
>>>
>>> Guys
>>>
>>> if you would like the script set from my Solaris install
>>> then I can post it tomorrow. It is pretty straight forward and
>>> not particularly rocket science, but it works.
>>>
>>> Regards Laurence
>>>
>>>> -----Original Message-----
>>>> From: developers-bounces (AT) lists (DOT) slimdevices.com
>>>> [mailto:developers-bounces (AT) lists (DOT) slimdevices.com]On Behalf Of dean
>>>> blackketter
>>>> Sent: 24 November 2003 20:40
>>>> To: SlimDevices Developers
>>>> Subject: Re: [Developers] Gentoo init.d script
>>>>
>>>>
>>>> Got it.
>>>>
>>>> Thanks!
>>>>
>>>>
>>>> On Nov 24, 2003, at 12:12 PM, Roy M. Silvernail wrote:
>>>>
>>>>> On Monday 24 November 2003 14:25, dean blackketter wrote:
>>>>>> I'm about to check in this under:
>>>>>>
>>>>>> slim/platforms/gentoo
>>>>>
>>>>> Dean, there's a word-wrap glitch in the original post. I'm
>>>>> attaching
>>>>> a clean
>>>>> version.
>>>>> <slimserver>

[Rahul Agarwal]

You are right. The script should be more generic. Depending on the user
install the DAEMON variable can be set to the correct binary. Please
change the DAEMON variable to something like
/usr/local/SlimServer/slimserver.pl.

Thanks,
--
\ `*~rahul~* `/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~
\ \|/ /
( o,o )
----oOO--------OOo----
ragarwal (AT) fit (DOT) edu

Get my public key at http://my.fit.edu/~ragarwal/tipiyano.asc

On Mon, 2003-11-24 at 20:17, dean blackketter wrote:
> Thanks, but I wonder if the version number is really a good thing to
> have hard coded in there. Is this a typically Debian thing to do?
>
>
> On Nov 24, 2003, at 5:07 PM, Rahul Agarwal wrote:
>
> > I couldn't find a init.d script for Debian, so here's a modified
> > version
> > of the Gentoo script submitted earlier that works for Debian
> > Woody/Sarge. Please read the first few lines to make sure that they are
> > correct for your system.
> >
> > Hopefully, it will save a few minutes for Debian users .
> >
> > Thanks,
> > --
> > \ `*~rahul~* `/
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~
> > \ \|/ /
> > ( o,o )
> > ----oOO--------OOo----
> > ragarwal (AT) fit (DOT) edu
> >
> > Get my public key at http://my.fit.edu/~ragarwal/tipiyano.asc


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD8DBQA/wuHOd8AkZVDpNdsRAqmcAJ9+gCxnKtJDkuvFlBYhHJ64SAtyHA CdGWHO
NKlCJa07qM/gIMsYTrmBVtI=
=6TGX
-----END PGP SIGNATURE-----

[Bruno Rodrigues]

A Ter, 2003-11-25 às 01:07, Rahul Agarwal escreveu:
> I couldn't find a init.d script for Debian, so here's a modified version
> of the Gentoo script submitted earlier that works for Debian
> Woody/Sarge. Please read the first few lines to make sure that they are
> correct for your system.
>
> Hopefully, it will save a few minutes for Debian users .
>
> Thanks,

you could just apt-get install slimp3

[Rahul Agarwal]

On Tue, 2003-11-25 at 09:35, Bruno Rodrigues wrote:
<snip>
> you could just apt-get install slimp3

Which mirror has it? I use netselect-apt to find the fastest servers
around me. Both the stable and testing tree does not have it. I did not
check the unstable tree. Also a search on apt-get.org does not return
anything.

In any case, I installed the latest nightly built, for which the debs
would be hard to find.

Thanks,
--
\ `*~rahul~* `/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~
\ \|/ /
( o,o )
----oOO--------OOo----
ragarwal (AT) fit (DOT) edu

Get my public key at http://my.fit.edu/~ragarwal/tipiyano.asc

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD8DBQA/w3Jld8AkZVDpNdsRAr44AKCMGggTa834bGwJ3g/Oy6ntP6ek7QCgqy7c
s8OQt1+5tL3EeL++84MZeS0=
=/QYP
-----END PGP SIGNATURE-----

[Bruno Rodrigues]

A Ter, 2003-11-25 às 15:23, Rahul Agarwal escreveu:
> On Tue, 2003-11-25 at 09:35, Bruno Rodrigues wrote:
> <snip>
> > you could just apt-get install slimp3
>
> Which mirror has it? I use netselect-apt to find the fastest servers
> around me.

4.2.6 is in testing and in unstable. still no packages for stable, but I
can port if you really need it.


> Both the stable and testing tree does not have it.

http://ftp.uk.debian.org/debian/pool/main/s/slimp3/
http://qa.debian.org/developer.php?l...itux (DOT) org

(packages.{qa.,}debian.org are still down)


> I did not
> check the unstable tree. Also a search on apt-get.org does not return
> anything.

apt-get.org seems to be broken:

http://www.apt-get.org/list/?site=205
http://www.litux.org/debian/unstable...es.html#slimp3


> In any case, I installed the latest nightly built, for which the debs
> would be hard to find.

You are totally right! we need some kind of apt-cvs

[Rahul Agarwal]

On Wed, 2003-11-26 at 16:06, Bruno Rodrigues wrote:
> 4.2.6 is in testing and in unstable. still no packages for stable, but I
> can port if you really need it.
>
That won't be required. I am running testing .
>
> > Both the stable and testing tree does not have it.
>
> http://ftp.uk.debian.org/debian/pool/main/s/slimp3/
> http://qa.debian.org/developer.php?l...itux (DOT) org

Thanks for the links


> You are totally right! we need some kind of apt-cvs
>
Hmm, interesting idea.

Thanks for your help.
--
\ `*~rahul~* `/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~
\ \|/ /
( o,o )
----oOO--------OOo----
ragarwal (AT) fit (DOT) edu

Get my public key at http://my.fit.edu/~ragarwal/tipiyano.asc

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD8DBQA/xRtxd8AkZVDpNdsRAo8KAKCISPbno2//x6l63Pe2upQnpyokLwCgl+w2
qXSF7Mfx/AtbqP97WgcKAjc=
=HL+P
-----END PGP SIGNATURE-----