Hi
I now have 2 SB Touches hooked up to my NAS and SB Server software. Is there anywhere in the server software I can identify which Touch is which?
Is it possible to give names to those Touch's? If so, where can I do this?
Now if I go to the Settings of the server software, I click the 'Player' tab and if I click 'Squeezebox Touch' drop down arrow, I see 2 SB Touch but they only bring up the Alarm settings.
With 2 Touch's and since I have not given them individual names yet, how do I identify which on is the older and/or new one to name them correctly?
Also, where in the server software do I go and adjust the time. The Touch is showing an hour behind.
Rgds
Pat
Results 1 to 5 of 5
Thread: 2 SB Touch and NAS
-
2010-12-25, 20:02 #1Senior Member
- Join Date
- Apr 2010
- Posts
- 252
2 SB Touch and NAS
Last edited by souwalker; 2010-12-25 at 20:07.
-
2010-12-25, 20:35 #2Senior Member
- Join Date
- Apr 2005
- Location
- Colorado
- Posts
- 10,073
Not sure what's going on there. Maybe they're not attached to the server, but to mysqueezebox.com instead.
You pretty much have to give them names to tell them apart. You can set the player name either in the web interface's Settings > Player > Touch > Basics Settings, or on the player itself under Settings > Squeezebox Name. Obviously, if they both start out with the same name, then doing it on the players is the only way to know for sure which gets which name.With 2 Touch's and since I have not given them individual names yet, how do I identify which on is the older and/or new one to name them correctly?
It should take the time from the server, like all Squeezeboxes, but make sure the timezone is set correctly on the player. On the player go into Settings > Advanced > Timezone.Also, where in the server software do I go and adjust the time. The Touch is showing an hour behind.
-
2010-12-25, 21:37 #3Senior Member
- Join Date
- Apr 2010
- Posts
- 252
Got it.
Many Thanks
Pat
-
2010-12-25, 23:58 #4
In the web-UI > settings
at "player settings" > "basic settings"
The last lines on that page is it's ip number on the network and the players mac-address .
The mac number is printed on the sticker at the bottom off the player.
I would also consider using different wallpapers (background pic) on each player to tell them apart.
This must be setup in both players.
You have probably noticed the "choose player" menu option that is now avaible on both your Touch, so now you can control the other player from the front and with the ir.
Now that you named them ,you can still tell them apart at the top off the home screen, there the name of the controlled player is shown, but it is not that obvius so different backgrounds makes it obvius from the other side of the room.--------------------------------------------------------------------
Main hifi: Touch + CIA PS +MeridianG68J MeridianHD621 MeridianG98DH 2 x MeridianDSP5200 MeridianDSP5200HC 2 xMeridianDSP3100 +Rel Stadium 3 sub.
Bedroom/Office: Boom
Kitchen: Touch + powered Fostex PM0.4
Misc use: Radio (with battery)
iPad1 with iPengHD & SqueezePad
(in storage SB3, reciever ,controller )
server HP proliant micro server N36L with ClearOS Linux
http://people.xiph.org/~xiphmont/demo/neil-young.html
-
2010-12-26, 16:30 #5

Reply With Quote

