I'm looking for a linear PS to replace the Walwart that came with the Touch. I would appreciate any recommendations.
Thanks,
jllaudio
Results 1 to 10 of 99
Thread: Linear Power Supplies
-
2010-10-14, 07:48 #1Junior Member
- Join Date
- Oct 2010
- Posts
- 3
Linear Power Supplies
-
2010-10-14, 07:54 #2Senior Member
- Join Date
- May 2008
- Location
- United States
- Posts
- 8,173
You may want to review this thread.
http://forums.slimdevices.com/showth...h+power+supply
-
2010-10-14, 07:57 #3
Hello and Welcome to the Forum. Recommendations: save your money and put it toward a great DAC or Transporter. Paying more then $25 for a power supply makes no sense with the Touch.
Quick Question, WHY? Is your wall-wart PS bad? Is it causing a ground loop?
Cost wise and audio benefits wise replacing the OEM Power Supply doesn't make sense when the OEM is just fine. They did a very good job on the internal regulators on the Touch and it has internal switching supplies so replacing the OEM switcher accomplishes nothing as its really only acting as the supply voltage just as the AC power cord does on ones Amplifier.iPhone
Media Room:
ModWright Platinum Signature Transporter, VTL TL-6.5 Signature Pre-Amp, Ayre MX-R Mono's, VeraStarr 6.4SE 6-channel Amp, Vandersteen Speakers: Quatro Wood Mains, VCC-5 Reference Center, four VSM-1 Signatures, Video: Runco RS 900 CineWide AutoScope 2.35:1, Vandersteen V2W Subwoofer
Living Room:
Transporter, ADCOM GTP-870HD, Cinepro 3K6SE III Gold, Vandersteen Model 3A Signature, Two 2Wq subs, VCC-2, Two VSM-1
Office: Touch with Vandersteen VSM-1s
Kitchen: Touch in-wall mount w/ Thiel Powerpoint 1.2s
Bedroom: Squeezebox BOOM
Bathroom: Squeezebox Radio
Around the House: SliMP3, SB1, SB2, SB3
Ford Thunderbird: Duet, Mac Mini
Ford Expedition: SB Touch, USB drive
-
2010-10-14, 11:50 #4Member
- Join Date
- Nov 2009
- Posts
- 37
I can't hear a difference
I tried the Welborne PS with my Duet. To my ears, it made absolutely no difference when listening to the digital output via my DAC. Maybe there was little difference on the analog out. If anything the stock switching PS is mechanically quieter than the Welborne PS, which has a slight - but audible - mechanical hum from the transformer.
-
2010-10-27, 01:44 #5Senior Member
- Join Date
- Oct 2010
- Posts
- 138
I have built a diy PS for my Touch with SuperTeddyReg.
120VA transformator, rectifier bridge with fast diodes, 6800uF Panasonic cap and then SuperTeddyReg and good cables.
IMHO there is a huge sonical difference (using analogue or digital outputs) between delivered switched ps and well build high quality linear ps.
-
2010-10-27, 06:47 #6
HUGH? - just how how HUGH? HUGH enough that anyone can hear the difference?
It's statements like "IMHO there is a huge sonical difference" that throw many people all into a tissy. Especially what such statements run counter to the experience of many of these people.
So please, do tell us just how HUGH is the difference with some specific examples, like deeper bass, clearer midrange, etc. TIA!Living Rm: Transporter-SimAudio pre/power amps-Vandersteen 3A Sign. & sub
Home Theater: Touch-Marantz HTR-Energy Veritas 2.1 & Linn sub
Computer Rm: Touch-Headroom Desktop w/DAC-Aragon amp-Energy Veritas 2.1 & Energy sub
Bedroom: Touch-HR Desktop w/DAC-Audio Refinement amp-Energy Veritas 2.0
Guest Rm: Duet-Sony soundbar
Garage: SB3-JVC compact system
Controls: iPeng; SB Controller; Moose & Muso
Server: SBS on dedicated windows 7 computer w/2 Drobos
Last.fm
-
2010-10-27, 06:53 #7Let me guess: it will be "airier sound stage, more ambience, like the performers are here with me, immediacy, increased commitment, more colour, less cramped expression, ......." Oh dear. This thread now belongs in Audiophiles.So please, do tell us just how HUGH is the difference with some specific examples,like deeper bass, clearer midrange, etc. TIA!Martin at HeadSpin HD now on Blu-ray
-
2010-10-27, 07:04 #8Living Rm: Transporter-SimAudio pre/power amps-Vandersteen 3A Sign. & sub
Home Theater: Touch-Marantz HTR-Energy Veritas 2.1 & Linn sub
Computer Rm: Touch-Headroom Desktop w/DAC-Aragon amp-Energy Veritas 2.1 & Energy sub
Bedroom: Touch-HR Desktop w/DAC-Audio Refinement amp-Energy Veritas 2.0
Guest Rm: Duet-Sony soundbar
Garage: SB3-JVC compact system
Controls: iPeng; SB Controller; Moose & Muso
Server: SBS on dedicated windows 7 computer w/2 Drobos
Last.fm
-
2010-10-27, 07:44 #9Senior Member
- Join Date
- Oct 2010
- Posts
- 138
I think that instead of writing about my spelling errors
you should just try one good linear PS with your SBT.
Than you will have your own experience and you can report your findings here.
-
2010-10-27, 08:03 #10Senior Member
- Join Date
- Apr 2005
- Location
- Buckinghamshire, England
- Posts
- 9,983
We've been over this so many times. The digital output is completely unaffected by the external power supply (asuming it is supplying the right voltage and current and not injecting a ton of noise). There is no demonstrable/repeatable/provable audible or measurable difference (if anyone has any FACTUAL evidence, I'm all ears). Probably not what you wanted to hear. Ho-hum.
I'll leave it to others to comment on the analogue output.
Just because audio folk-lore insists that "improving" the power supply is always a good thing doesn't make it into a fact. Likewise the same folk-lore that insists that "linear" is always better than "switched" - which simply is NOT the case. Both are capable of good or bad results.You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal...
Touch(wired/W7)+Teddy Pardo PSU - Audiolense 3.3/2.0+INGUZ DRC - MF M1 DAC - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters,VdH Toslink,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables
Stax4070+SRM7/II phones
Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything.

Reply With Quote

