Hi, I've been a successful and satisfied SBD user for several years now. Last night, the music stopped. I mean, the remote says something is playing; the SB receiver has a white light; and yet no sound comes out of the speakers. I've tried connecting the RCA plugs to other inputs, I've tested the Arcam amp with other signals, I've done the factory reset several times, all to no avail. What gives? Any ideas?
BTW: I read on another forum that holding down the SB receiver button while pluggin in initiates flashing lights and test tones. I get the lights, but no audible tones.
Results 1 to 2 of 2
Thread: Suddenly, no sound!?
Hybrid View
-
2010-04-04, 05:17 #1Junior Member
- Join Date
- Apr 2010
- Posts
- 1
Suddenly, no sound!?
-
2010-04-04, 05:59 #2Senior Member
- Join Date
- Apr 2005
- Location
- Buckinghamshire, England
- Posts
- 9,983
xilinx reset...
You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal...
Touch(wired/W7)+Teddy Pardo PSU - Audiolense 3.3/2.0+INGUZ DRC - MF M1 DAC - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters,VdH Toslink,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables
Stax4070+SRM7/II phones
Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything.

Reply With Quote
