No sound from SB3

[Ol' Ken]

I set up my SB3 in a new house a few weeks ago and wasn't able to get the wireless working to as noted by others in this forum. I was able to get it to work using an ethernet cable and a Crane FM TX to my rcvrs. All was good until yesterday afternoon EST when the sound stopped. The screen indicated that all was well and I was able to change stations etc but no sound what so ever. I figured my TX has stopped working.
Today I got the wireless to connect but there is still no sound although the screen indicates that it should be working.
and
the adding favourites feature now seems to be useless.

all and any usefull suggestions appreciated.

TIA

[snarlydwarf]

I set up my SB3 in a new house a few weeks ago and wasn't able to get the wireless working to as noted by others in this forum. I was able to get it to work using an ethernet cable and a Crane FM TX to my rcvrs. All was good until yesterday afternoon EST when the sound stopped. The screen indicated that all was well and I was able to change stations etc but no sound what so ever. I figured my TX has stopped working.

Unplug the SB3.

Press and hold '1' on the remote (of course pointing it at the SB3...)

Plug SB3 back in.

Continue holding '1' until the SB3 says something like 'Programming Xilinx'.

That should fix it.

[Ol' Ken]

Unplug the SB3.

Press and hold '1' on the remote (of course pointing it at the SB3...)

Plug SB3 back in.

Continue holding '1' until the SB3 says something like 'Programming Xilinx'.

That should fix it.

Tried it.... went through the process but to no avail

[Ol' Ken]

Tried it.... went through the process but to no avail

Tried again about 1700 local...... now have music :-D
favourites are still pooched tho'

Many thanks
Ol' Ken