Obtain a working SB3. Disassemble, remove CPU module (using CA solvent if needed on mezzanine connector). Using SMD hot air rework station and nozzle suitable for TSOP 48 package, remove flash chip (marked AM29LV160xxx or compatible). Install in compatible programmer using appropriate adaptor and extract the flash image. Resolder flash chip and reassemble working SB3.
Disassemble demo SB3 and remove CF daughtercard. Repeat above procedure, except write the extracted image from step 1.
If you want wireless, obtain an Atheros mini-PCI module with AR2413 chipset and suitable antennas (eg 2.4GHz folded planar with mini I-PEX connector). Hire a lab to verify regulatory compliance. Reassemble.
Results 1 to 10 of 35
2009-12-09, 12:00 #9
Last edited by seanadams; 2009-12-09 at 12:03.