SSODS 4 released

[Zucht]

Thanks flipflip for making SSODS4 available!!

[PetervanHanergem]

First of all, Thanks FlipFlip for making us happy.

I'm not that home in linux, i don everything and then i'm stuck here

*****************************

On a Turbostation (WARNING: untested! Get help in the forum if you need):

$ mount -t ext2 /dev/mtdblock5 /tmp/config
Edit /tmp/config/autorun.sh to include the command from 8.
$ umount /tmp/config

*******************************

How do i edit the .sh file ? an what is the command from 8 ?

thanks

[Pade2204]

is there a .pat file ??

I cant install it on DiskStation ?

[bobertuk]

I've been trying to install 3rd party plugins using SbS on QNAP TS-509 but with no success.

SbS -> settings -> Plugins keeps asking for 'Restart' or 'Restart Later' but plugins will not install - can't see anything useful in the logs. Several QNAP users have reported the same issue over in the QNAP forums.

Bob

[Dingsdada]

many thanks to flipflip!!!

i've managed to install ssods4 and 7.4.1 nightly on my ds209+.
everything went fine, but scanning of covers is a big problem:
about half a minute for 1!!! cover (i've about 1800 covers - so i've to abort scanning)
now navigation in trees is very slow (with my radio)

[HarryPotter]

i've managed to install ssods4 and 7.4.1 nightly on my ds209+.
everything went fine

Can you tell me please which 7.4.1 file exactly did you download and install with ssods 4. There are so many and I realy dont know anymore which one to take.....

[jaerc]

Tar error when installing new squeezeboxserver with ssods

Hi Guys

I did install SSODS 4.0-7.4.0 and then I tried to install
squeezeboxserver-7.4.0-28672.tgz with ssods,

The log shows the following error:

gzip: stdin: decompression OK, trailing garbage ignored
squeezeboxserver-7.4.0-28672/Changelog3.html
squeezeboxserver-7.4.0-28672/revision.txt
tar: Child returned status 2
tar: Exiting with failure status due to previous errors

I also did try a 7.4.1 tgz file and other 7.4.0 but I always get this error.

I have a Synology DS209+II with DSM 2.2 installed

How can I succesfully install the squeezeboxserver with ssods?

Many thanks
Chris

[katmic]

locale warnings

I installed SSODS4, great work! It was successful, but I got the following warnings regarding the local settings:

schiller> /opt/ssods4/etc/init.d/rc.ssods
/opt/ssods4/etc/ssods.conf: line 164: warning: setlocale: LC_ALL: cannot change locale (en_GB.UTF-8): No such file or directory
/opt/ssods4/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_GB.UTF-8)
/opt/ssods4/etc/ssods.conf: line 164: warning: setlocale: LC_ALL: cannot change locale (en_GB.UTF-8)
SSODS: checking system ..... OK.
Starting SqueezeboxServer .. skipping, auto start is disabled.
Updating /opt/ssods4/etc/sudoers .. OK.
Starting thttpd-ssods ...... OK.

I also got the error message for the squeezebox tar file as described in the posts above.

greetings
katmic

[Ryssen]

Can´t unzip the "ARM (x09/x19 series) [TS-109/ 119/ 209/ 210/ 219/ 219P/ 409/ 409U/ 410/ 419P/ 419U]"
is not a valid archive..

Whats wrong?

[bobertuk]

3rd party plugins not installed because Archive/Zip.pm not found

Not a particularly good fix for most people but I got it working...

the relevant error in SbS logs is:

[09-10-19 19:55:53.5809] Slim::Utils::PluginDownloader::extract (102) error loading Archive::Zip Can't locate Archive/Zip.pm in @INC (@INC contains: /opt/ssods4/var/home/SqueezeboxServer/Cache/InstalledPlugins /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer/CPAN/arch/5.10/i386-linux-thread-multi /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer/CPAN/arch/5.10/i386-linux-thread-multi/auto /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer/CPAN/arch/5.10.0/i686-linux-thread-multi /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer/CPAN/arch/5.10.0/i686-linux-thread-multi/auto /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer/CPAN/arch/5.10/i686-linux-thread-multi /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer/CPAN/arch/5.10/i686-linux-thread-multi/auto /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer/CPAN/arch/i686-linux-thread-multi /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer/lib /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer/CPAN /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer /opt/ssods4/lib/perl5/5.10.0/i686-linux-thread-multi /opt/ssods4/lib/perl5/5.10.0 /opt/ssods4/lib/perl5/site_perl/5.10.0/i686-linux-thread-multi /opt/ssods4/lib/perl5/site_perl/5.10.0 .) at /share/HDA_DATA/.qpkg/SSOTS/var/home/SqueezeboxServer/Slim/Utils/PluginDownloader.pm line 98.


It looks as if SbS can't find /Archive/Zip.pm to install plugins. I found the file in 'SSOTS/lib/perl5/5.10.0/i686-linux-thread-multi/IO/Compress/Zip.pm' and copied it into several different place but couldn't get it to work. In the end I copied all of CPAN back into Squeezeboxserver, changed owner/group (recursive) to 'guest/everyone' - and it now works.

More investigation needed to see where best to copy that single file but my guess is anywhere indicated in the above error as long as owner/group are correct.

has anyone else noticed that owner and group of most files in SSODS 4 are both set to 1004 - or is it just on my setup?

Bob

[Dingsdada]

Can you tell me please which 7.4.1 file exactly did you download and install with ssods 4. There are so many and I realy dont know anymore which one to take.....

i installed this version:
squeezeboxserver-7.4.1-28913.tgz Squeezebox Server: Unix Tarball (for Perl 5.8/5.10, Darwin, i386, x86_64, i386 FreeBSD, ARM EABI, PowerPC)

[flipflip]

I installed SSODS4, great work! It was successful, but I got the following warnings regarding the local settings:

Ignore it. That's normal. It should only complain the first time you run it.

[flipflip]

[09-10-19 19:55:53.5809] Slim::Utils::PluginDownloader::extract (102) error loading Archive::Zip Can't locate Archive/Zip.pm in @INC

Thanks. The Archive::Zip is not included in SSODS. I'll include it in the next release.

[flipflip]

For those with the "trailing garbage" error when installing the tar ball:

the upload routine is broken. It works with a .tar.bz2, which is what I tested. It doesn't work with a .tar.gz.

You have two options

a) use http://oinkzwurgl.org/downloads/ssod...noCPAN.tar.bz2
b) copy the tar ball manually to $SSODSDIR/var/home/tarballs

I have fixed the upload routine and this should work in the next release.

[flipflip]

is there a .pat file ??

No.