Transporter: Digital Inputs

[egd]

Two things re abovementioned:

1) wouldn't the logical place for the menu option be under Settings/Music Source rather than a standalone Digital Inputs menu

2) how does one switch back to the library as the "input" after having selected a digital input and wanting to revert to playing something from one's library? Shouldn't there be a menu option (in same place as Digital Inputs) that let's one revert to the library?

[Teus de Jong]

At 1: I'm used to the way it is, so I would like to keep it this way.

At 2: Just go to the library, select some music and press play: the transporter will automatically switch back to network playing.

Teus

[egd]

At 2: Just go to the library, select some music and press play: the transporter will automatically switch back to network playing.

Thx, I'd done that but I'd been listening at very low volume and the library song I selected had a very quiet intro so it initially seemed to me nothing was playing.

[dminches]

Just go to the library, select some music and press play: the transporter will automatically switch back to network playing.

Teus

When I did this (switched from a digital input to the library) the selected file from the library did not play. I had to power down the transporter to get it to play.

Is this a known issue?

[Teus de Jong]

When I did this (switched from a digital input to the library) the selected file from the library did not play. I had to power down the transporter to get it to play.

Is this a known issue?

Not that I know of. Here this works perfectly.

Teus

[jazztime]

When I did this (switched from a digital input to the library) the selected file from the library did not play. I had to power down the transporter to get it to play.

Is this a known issue?

It has been a known issue for 1-2 years, but I think it was finally fixed with the latest firmware (80).

[dminches]

It has been a known issue for 1-2 years, but I think it was finally fixed with the latest firmware (80).

I'll have to check what firmware I am running but I still have the issue.

[Keymaster]

Indeed, that should be fixed w/ latest FW.

I would think that the same would apply to a Modwright (as the differences between stock and Mod lay mostly in the output section, correct?).