Please help with wired ethernet setup

[elcid]

o.k., this one is solved. (see below)

Hello,

I have a problem setting up the SB Duet via ethernet (wired).

First, I am doing the setup in German, so the English translations of the options may be not 100% correct.

I had set up the receiver and controller for testing purposes in the "standard" procedure (e.g. in wireless mode using a wi-fi router). Now, I do not want to use the wifi-router anymore, but connect via ethernet only(what the manual calls the "bridge" mode). I have reset both the receicer and the remote to factory settings (at least I hope so, the receiver blinks in all colors)and I want to redo the setup (in fact, the controller leaves me no other option).
The manual states that I should choose "wireless network" first and then "connect to squeezebox". Now, this "connect to squeezebox" option is not available (I remember seeing it the very first time I set up the SB).
How can I get the option back?

Many thanks for your help,

elcid
--------------

I have solved the problem. I gave the squeezebox another factory reset plus power-off/on and I removed the controller's battey. After re-inserting, the setup showed me the option again. Note: The squeezebox was blinking in red again after the second reset.

elcid