Slimserver sous XP: pb avec le service

[besen]

Bonjour,

J'ai pas mal cherché sur les forums et les FAQ mais je n'ai rien trouvésur le problème que je rencontre.

J'utilise XP Familial et je viens d'installer la dernière version de SlimServer. Le démarrage se passe comme prévu. Lorsque je double clic sur l'icone (à côté de l'horloge), les interfaces Web s'ouvrent bien.

MAIS:
1. Aucun fichier n'est détecté (0 albums, 0 songs, etc.)
2. Dés que je clique quelque part, il ne se passe rien... C'est comme si le server plantait, mais aucune erreur pour autant.

Si vous avez des éléments que je pourrais tester...

Cordialement,

Sébastien R.

[poluxmeteor]

A premier lancement, le serveur scanne ta librairie de mp3s.
Cela peut ralentir ta machine si elle est pas dernier modele et donner l'impression d'un plantage.
Tu as essaye de le laisser mouliner un moment?

[besen]

En fait, je n'ai pas rééssayer, car entre temps, j'ai reçu un NAS (NSLU2), sur lequel j'ai installé la dernière version de UNSLUNG.

Malheureusement, j'ai des erreurs MySQL à la compilation:

************************************************** *******
# ./build-perl-modules.pl
Welcome to the Slim Devices perl module installer.

These packages are needed for SlimServer to function.
You will need a C compiler (gcc), make, and perl installed.

You will need development libraries for MySQL. eg: libmysqlclient

You will need development libraries for expat. eg: libexpat1-dev

*** Ignore any warnings about AppConfig. ***

Please enter a perl binary to use (defaults to /usr/bin/perl)
This must be the same perl binary that you ran this program with -->
Please enter the path to your SlimServer directory (ex: /usr/local/slimserver) -->
Please enter a directory to download files to --> /etc/slim-data
Downloads will use wget to fetch tarballs.

Downloading Compress-Zlib-1.41.tar.gz to: /etc/slim-data
Uncompressing..
Configuring..
/usr/bin/perl Makefile.PL
Up/Downgrade complete.
Building..
Library for Compress-Zlib-1.41.tar.gz is OK!

Downloading DBI-1.50.tar.gz to: /etc/slim-data
Uncompressing..
Configuring..
/usr/bin/perl Makefile.PL

I see you're using perl 5.008008 on armv5b-softfloat-linux, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.

Building..
In file included from DBIXS.h:31,
from Perl.xs:5:
dbipport.h:227:1: warning: "PERL_UNUSED_DECL" redefined
In file included from DBIXS.h:19,
from Perl.xs:5:
/opt/lib/perl5/5.8.8/armv5b-linux/CORE/perl.h:163:1: warning: this is the location of the previous definition
In file included from DBIXS.h:31,
from DBI.xs:12:
dbipport.h:227:1: warning: "PERL_UNUSED_DECL" redefined
In file included from DBIXS.h:19,
from DBI.xs:12:
/opt/lib/perl5/5.8.8/armv5b-linux/CORE/perl.h:163:1: warning: this is the location of the previous definition
DBI.xs: In function `dbih_clearcom':
DBI.xs:1183: warning: unused variable `Perl___notused'
DBI.xs: In function `dbih_get_fbav':
DBI.xs:1332: warning: unused variable `Perl___notused'
DBI.xs: In function `dbih_set_attr_k':
DBI.xs:1514: warning: unused variable `Perl___notused'
DBI.xs:1416: warning: unused variable `Perl___notused'
DBI.xs: In function `dbih_get_attr_k':
DBI.xs:1654: warning: unused variable `Perl___notused'
DBI.xs: In function `log_where':
DBI.xs:2081: warning: unused variable `Perl___notused'
DBI.xs: In function `XS_DBI_dispatch':
DBI.xs:2532: warning: dereferencing type-punned pointer will break strict-aliasing rules
DBI.xs:2971: warning: unused variable `Perl___notused'
Library for DBI-1.50.tar.gz is OK!

Downloading DBD-mysql-3.0002.tar.gz to: /etc/slim-data
Uncompressing..
Configuring..
PERL5LIB=/etc/slim-data/DBI-1.50/blib/lib:/etc/slim-data/DBI-1.50/blib/arch /usr/bin/perl Makefile.PL
Can't exec "mysql_config": No such file or directory at Makefile.PL line 76.
Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
Failed to determine directory of mysql.h. Use

perl Makefile.PL --cflags=-I<dir>

to set this directory. For details see the INSTALL.html file,
section "C Compiler flags" or type

perl Makefile.PL --help
There was a problem creating Makefile - exiting!
************************************************** *******


>>> I created a new post: http://forums.slimdevices.com/showth...034#post142034