I bought a shiny new router today with a 5dbi wireless signal strength and Gigabit ethernet. My ZyXEL router wasn't giving me a strong enough signal.
As far as I can tell, I can connect okay to the wireless network. I did a factory reset on the SB3 by pulling the plug then replugging whilst holding down the add key. Thereafter I got through the set up, had an IP automatically assigned and had to enter the SlimServer IP manually. That's as far as it gets.
The router is a D-Link DGL-4300 and I'm running SlimServer on a Clark Connect 3.2 box. My two Windows PCs and the ClarkConnect server are all hardwired into the router, and the old router is plugged into the WAN port on the new router for Internet access. I've disabled wireless on the old router.
Has anyone any ideas? I was hoping to work on my Cyrillic tags problem, but it's taken hours of trying to set up the new router and I'm done in for the day. If only I were being paid for the hours spent setting up the Squeezebox. Still, I'm sure it will be worth it in the end.
Results 1 to 10 of 15
Thread: Can't connect to SlimServer
2006-02-03, 15:13 #1
- Join Date
- Jan 2006
- Isle of Arran
Can't connect to SlimServer