I don't usually use headphones, but I wanted to hear how close the synchronisation was between my SB1 and SB2, and to try to compare the audio quality difference between the two devices.
I detected a bit of crackly sound on the left ear, and as I checked the jack plug was fully inserted, the left ear completely dropped out. I found I had to wiggle it into a good position to make a good contact - it felt a little loose. These are Sennheiser HD535 headphones. I tried connecting it to the SB1, and the connection was fine even giving the connection a little careful wiggle as a test.
I haven't got any other headphones to hand at the moment to test the SB2 connector more thoroughly, and I'm not particularly bothered, as the SB2 is going in the lounge and I don't often use headphones (if I do I can use the HiFi Amp headphone jack). But I just wondered if anyone else had experienced dodgy connections. Is the connector part different to the SB1?
Results 1 to 10 of 11
2005-05-04, 15:54 #1
Dodgy headphone connection on SB2?