Home of the Squeezebox™ & Transporter® network music players.
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1

    squeezelite constant crashing

    Hi

    I have squeezelite running on raspberry with osmc.

    the service is constant crashing.

    any hints to find the problem?

    memory, etc.

    I do not see errors

    Thanks T

  2. #2
    Senior Member DJanGo's Avatar
    Join Date
    Sep 2005
    Location
    Germany
    Posts
    2,486
    Quote Originally Posted by riker1@gmx.net View Post
    Hi

    I have squeezelite running on raspberry with osmc.

    the service is constant crashing.

    any hints to find the problem?

    memory, etc.

    I do not see errors

    Thanks T
    Hi,

    if you want us to help you > you may have to put some more infos.
    Which exact Version of squeezelite
    what else is running
    who is running squeezelite
    all codec installed
    and many more.

  3. #3

    Updates

    Hi

    of course will provide all the info required. Thanks for helping.

    it is a OSMC Leia with jessie based RPI 3 1 GB . But had same problem with Kodi 17.
    Having gpu_mem_1024=256 set.


    running: Squeezelite v1.8.6-957, Copyright 2012-2015 Adrian Smith, 2015-2017 Ralph Irving. See -t for license terms


    - there is also ser2net running
    - Spotitfy Connect Service / but disabled it for a while already
    - Have USB audio device attached
    card 0: Device [USB Audio Device], device 0: USB Audio [USB Audio]
    Subdevices: 0/1
    Subdevice #0: subdevice #0


    -> should I disable the bcm2835 ?

    Squeezelite is running as a service

    sudo service squeezelite status -l
    ● squeezelite.service - LSB: Lightweight headless Squeezebox emulator
    Loaded: loaded (/etc/init.d/squeezelite)
    Active: active (running) since Fr 2017-12-15 19:09:44 CET; 19h ago
    Process: 6719 ExecStop=/etc/init.d/squeezelite stop (code=exited, status=0/SUCCESS)
    Process: 6729 ExecStart=/etc/init.d/squeezelite start (code=exited, status=0/SUCCESS)
    CGroup: /system.slice/squeezelite.service
    └─6736 /usr/bin/squeezelite -n WohnV1osmc95RPI3 -o default -V Speaker -a 0 -m 00 00 00 00 00 95 -d all debug -f /var/log/squeezelite.log

    Logfile entries which I do not understand are:
    [16:13:34.006277] slimproto_run:572 error reading from socket: closed
    [17:28:07.539247] slimproto_run:572 error reading from socket: closed
    [17:30:56.640772] slimproto_run:572 error reading from socket: closed
    [10:45:17.100001] discover_server:821 error sending disovery
    [15:17:04.924515] discover_server:821 error sending disovery
    [03:57:49.988861] slimproto_run:572 error reading from socket: closed
    [10:18:14.731232] mad_decode:231 mad_frame_decode error: bad main_data_begin pointer

    No result for : dmesg -T | grep squeeze


    memory :
    $ free -m
    total used free shared buffers cached
    Mem: 747 666 81 14 75 385
    -/+ buffers/cache: 205 542
    Swap: 0 0 0



    what else does help you?
    Thanks T

  4. #4
    Senior Member DJanGo's Avatar
    Join Date
    Sep 2005
    Location
    Germany
    Posts
    2,486
    Quote Originally Posted by riker1@gmx.net View Post
    └─6736 /usr/bin/squeezelite -n WohnV1osmc95RPI3 -o default -V Speaker -a 0 -m 00 00 00 00 00 95 -d all debug -f /var/log/squeezelite.log
    please stop squeezelite and run
    /usr/bin/squeezelite -l

    try from bottom to top each of the listed device as parameter for -o

    lame is installed as well?

    why your using a mac from a xerox machine on your rpi???

  5. #5
    Hi

    what do you mean by :
    mac from a xerox machine on your rpi



    lame was not installed, should I better?

    here the result from:
    ~$ /usr/bin/squeezelite -l
    Output devices:
    null - Discard all samples (playback) or generate zero samples (capture)
    default:CARD=Device - USB Audio Device, USB Audio - Default Audio Device
    sysdefault:CARD=Device - USB Audio Device, USB Audio - Default Audio Device
    front:CARD=Device,DEV=0 - USB Audio Device, USB Audio - Front speakers
    surround21:CARD=Device,DEV=0 - USB Audio Device, USB Audio - 2.1 Surround output to Front and Subwoofer speakers
    surround40:CARD=Device,DEV=0 - USB Audio Device, USB Audio - 4.0 Surround output to Front and Rear speakers
    surround41:CARD=Device,DEV=0 - USB Audio Device, USB Audio - 4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Device,DEV=0 - USB Audio Device, USB Audio - 5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Device,DEV=0 - USB Audio Device, USB Audio - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Device,DEV=0 - USB Audio Device, USB Audio - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Device,DEV=0 - USB Audio Device, USB Audio - IEC958 (S/PDIF) Digital Audio Output
    dmix:CARD=Device,DEV=0 - USB Audio Device, USB Audio - Direct sample mixing device
    dsnoop:CARD=Device,DEV=0 - USB Audio Device, USB Audio - Direct sample snooping device
    hw:CARD=Device,DEV=0 - USB Audio Device, USB Audio - Direct hardware device without any conversions
    plughw:CARD=Device,DEV=0 - USB Audio Device, USB Audio - Hardware device with all software conversions
    default:CARD=ALSA - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
    sysdefault:CARD=ALSA - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
    dmix:CARD=ALSA,DEV=0 - bcm2835 ALSA, bcm2835 ALSA - Direct sample mixing device
    dmix:CARD=ALSA,DEV=1 - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample mixing device
    dsnoop:CARD=ALSA,DEV=0 - bcm2835 ALSA, bcm2835 ALSA - Direct sample snooping device
    dsnoop:CARD=ALSA,DEV=1 - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample snooping device
    hw:CARD=ALSA,DEV=0 - bcm2835 ALSA, bcm2835 ALSA - Direct hardware device without any conversions
    hw:CARD=ALSA,DEV=1 - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct hardware device without any conversions
    plughw:CARD=ALSA,DEV=0 - bcm2835 ALSA, bcm2835 ALSA - Hardware device with all software conversions
    plughw:CARD=ALSA,DEV=1 - bcm2835 ALSA, bcm2835 IEC958/HDMI - Hardware device with all software conversions

  6. #6

    -o default will not get away

    Quote Originally Posted by DJanGo View Post
    please stop squeezelite and run
    /usr/bin/squeezelite -l

    try from bottom to top each of the listed device as parameter for -o
    Hi
    how to I get rid of the -o default?

    SB_EXTRA_ARGS="-V Speaker -o dmix:CARD=Device,DEV=0 -a :::0 -m 00:00:00:00:00:95 -d all=debug -f /var/log/squeezelite.log"

    this ends up to

    └─12618 /usr/bin/squeezelite -n WohnV1osmc95RPI3 -o default -V Speaker -o dmix:CARD=Device,DEV=0 -a 0 -m 00 00 00 00 00 95 -d all debug -f /var/log/squeezelite.log

  7. #7

    mac from xerox?

    Quote Originally Posted by DJanGo View Post
    please stop squeezelite and run
    /usr/bin/squeezelite -l

    try from bottom to top each of the listed device as parameter for -o

    lame is installed as well?

    why your using a mac from a xerox machine on your rpi???

    what do you mean by this?

    how to remove? which files are this?

    ah understood: this option. without it lms server is not accessing right players was my exerience. I thought those addresses could be virtual fake more or less, wrong understanding?


    -m <mac addr> Set mac address, format: ab:cd:ef:12:34:56
    Last edited by riker1@gmx.net; 2017-12-16 at 10:33.

  8. #8
    Senior Member DJanGo's Avatar
    Join Date
    Sep 2005
    Location
    Germany
    Posts
    2,486
    Quote Originally Posted by riker1@gmx.net View Post
    what do you mean by this?

    how to remove? which files are this?

    ah understood: this option. without it lms server is not accessing right players was my exerience. I thought those addresses could be virtual fake more or less, wrong understanding?


    -m <mac addr> Set mac address, format: ab:cd:ef:12:34:56
    sorry
    i didnt understand most of your questions...
    What do you mean?

  9. #9
    Quote Originally Posted by DJanGo View Post

    why your using a mac from a xerox machine on your rpi???

    sorry
    i didnt understand most of your questions...
    What do you mean?
    Hi
    I was confused about your mac related feedback. espacially abouzt the xerox machine. ...
    First I could not identify what you mean, than I understood it is related to the -m option.

    Are there any known issues using the -m option? or any special mac adresses to be avoided?

    I have more squeezelite installations and could ony separate them using special mac adresse in -m options.

    Do you think crashed are caused by -m option?

    thanks t

  10. #10
    Senior Member
    Join Date
    Oct 2005
    Location
    Ireland
    Posts
    15,500
    The -m option is only needed when you have mulitple squeezelite running on same system.
    By default squeezelite should use the mac address of the network hardware.

    Are you running mulitple squeezelite instances ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •