Home of the Squeezebox™ & Transporter® network music players.
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Senior Member
    Join Date
    Oct 2005
    Location
    Ireland
    Posts
    15,320
    Quote Originally Posted by nunovi View Post
    Will try this afternoon and report back.
    I hope the "-R -u" settings are right - they are a bit cryptic so it may take a few attempts to get right combination.

    Code:
    -R -u [params]        Resample, params = <recipe>:<flags>:<attenuation>:<precision>:<passband_end>:<stopband_start>:<phase_response>,
                             recipe = (v|h|m|l|q)(L|I|M)(s) [E|X], E = exception - resample only if native rate not supported, X = async - resample to max rate for device, otherwise to max sync rate
                             flags = num in hex,
                             attenuation = attenuation in dB to apply (default is -1db if not explicitly set),
                             precision = number of bits precision (NB. HQ = 20. VHQ = 28),
                             passband_end = number in percent (0dB pt. bandwidth to preserve. nyquist = 100%),
                             stopband_start = number in percent (Aliasing/imaging control. > passband_end),
                             phase_response = 0-100 (0 = minimum / 50 = linear / 100 = maximum)

  2. #12
    Junior Member
    Join Date
    Jun 2008
    Posts
    14
    Quote Originally Posted by bpa View Post
    I hope the "-R -u" settings are right - they are a bit cryptic so it may take a few attempts to get right combination.

    Code:
    -R -u [params]        Resample, params = <recipe>:<flags>:<attenuation>:<precision>:<passband_end>:<stopband_start>:<phase_response>,
                             recipe = (v|h|m|l|q)(L|I|M)(s) [E|X], E = exception - resample only if native rate not supported, X = async - resample to max rate for device, otherwise to max sync rate
                             flags = num in hex,
                             attenuation = attenuation in dB to apply (default is -1db if not explicitly set),
                             precision = number of bits precision (NB. HQ = 20. VHQ = 28),
                             passband_end = number in percent (0dB pt. bandwidth to preserve. nyquist = 100%),
                             stopband_start = number in percent (Aliasing/imaging control. > passband_end),
                             phase_response = 0-100 (0 = minimum / 50 = linear / 100 = maximum)
    Bingo! Now resamples Qobuz to 24/96 and keeps CD quality untouched. You got the recipe right first time.

    Many thanks for your help!

    Nuno

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •