Home of the Squeezebox™ & Transporter® network music players.
Page 1 of 79 1231151 ... LastLast
Results 1 to 10 of 787
  1. #1
    Senior Member sbp's Avatar
    Join Date
    Apr 2010
    Location
    Denmark
    Posts
    1,088

    Announce piCorePlayer 3.20

    Hi guys, we are sorry for the late announcement - but pCP 3.20 has been released.

    KERNEL/FIRMWARE changes
    • 4.9.21 kernel
    • rpi firmware - 2017/03/31
    • config.txt changes to increase usable memory on rpi2/3 by 16M
    • config.txt changes to decrease videocore memory usage.
    • rpi Zero-W Support
    • Allo Boss and Piano-Plus Support
    • Changed 8192cu driver (same version that OSMC uses)
    • 8812au driver included


    Other PCP changes

    • Squeezelite updated to v1.86-945
    • ffmpeg updated to 3.17
    • wiringpi shared libraries included by default. (Used to be static linked to squeezelite).
    • flac updated to 1.3.2
    • utf8 support for fat32 partitions
    • New card configuration system, will help with speed on squeezelite page. Also allows us to add more specific card information.
    • Set --nomysqueezebox option from web interface
    • Default LMS install is 7.9.0 released verison
    • Great updates to pCP jivelite pacakge. Made possible by mherger
    • pcp Help web site http://picoreplayer.sourceforge.net.
    • This is still a work in progress, where we can easily create web pages with HOTO's and other information. If you have something you would like included, creates a simple web page and let us know.
    • And last but not least, corrections to the inplace update process
    • Reloading the reboot page should no longer reboot your pCP device again.
    • You can now do an insitu_update and change from pcpCore to pcpAudioCore, and vise versa.


    For the adventuresome 3.11 users reading this, If you do a hotfix (Near the bottom of the Main Page in Beta Mode), this will install a small fix, that will allow you to do an insitu_update to 3.20.
    By my tests, if you are using a 3.11 image, when you install 3.20, you should have about 180k of disk space left on the boot partition. 99% Full. In my mind this is a bit risky, but I suppose if your card is not easily pulled, give this a try. Worse case you have to pull your card and reflash.

    Get the files from here: https://sites.google.com/site/picore.../home/download

    The pCP-Team
    Last edited by sbp; 2017-05-01 at 09:17.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://sites.google.com/site/picoreplayer/home

    Please donate if you like the piCorePlayer

  2. #2

    wifi in rpi3

    wifi in rpi3
    I use 3.2 final in rpi3 but internal wifi is fail cannot scan any network
    but 3.11 is ok

  3. #3
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    896
    Quote Originally Posted by htctyo View Post
    wifi in rpi3
    I use 3.2 final in rpi3 but internal wifi is fail cannot scan any network
    but 3.11 is ok
    Works just fine on my 2 rpi3 systems, and my zero-w systems. Must be an issue with your router setup, more than likely channel configuration.

  4. #4
    Quote Originally Posted by htctyo View Post
    wifi in rpi3
    I use 3.2 final in rpi3 but internal wifi is fail cannot scan any network
    but 3.11 is ok
    I have the same experience. 3.11 audio works perfectly, but 3.20 audio cannot find my wifi network using the scan option.

    Back to 3.11 for me!

  5. #5
    Member
    Join Date
    Apr 2014
    Location
    Nottinghamshire
    Posts
    61
    Works perfectly for me. I updated Insitu from 3.11 using the instructions above. I've been quite happily listening to music and radio since.

    Sent from my Nexus 6P using Tapatalk

  6. #6
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    896
    Quote Originally Posted by merlinus View Post
    I have the same experience. 3.11 audio works perfectly, but 3.20 audio cannot find my wifi network using the scan option.

    Back to 3.11 for me!
    Wifi has never been recommended with the Audio version, I should just disable wifi in that version.

  7. #7

    Thank you for this new version

    I've done in-situ upgrades of a Pi2+IQaudio PiDAC+, a Pi3 and Pi3+touchscreen+IQaudio PiDACZero, all without apparent issues.

  8. #8

    wifi in rpi3

    Works just fine on my 2 rpi3 systems, and my zero-w systems. Must be an issue with your router setup, more than likely channel configuration.

    I use auto in channel but still fail . what section I need to set I in my rounter I work fine in 3.11 thanks

  9. #9

    wifi in rpi3

    Quote Originally Posted by htctyo View Post
    I use auto in channel but still fail . what section I need to set I in my rounter I work fine in 3.11 thanks
    Please fix your router to use channel 1 and retry. Just to eliminate; sometimes the high channels do clash with the WIFI drivers.
    Also verify you did not disable the onboard wifi ( RPi Built-in Wifi must be ON at http:\\x.y.z.h/cgi-bin/wifi.cgi )
    You need a wired ethernet connection to check this.

  10. #10

    wifi in rpi3

    already change to 1 still fail
    why 3.11 is ok

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •