Home of the Squeezebox™ & Transporter® network music players.
Page 9 of 16 FirstFirst ... 7891011 ... LastLast
Results 81 to 90 of 154
  1. #81
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    640
    that helps, there is a ton of Arizona modules. I wonder if I need the mic input stuff too just to play sound.

    Let me dig into this

  2. #82
    Junior Member
    Join Date
    Oct 2011
    Posts
    19
    Quote Originally Posted by sbp View Post
    Yes I think we could try.
    But as we don't have a wolfson card we need info from you.

    Can you ssh into the latest piCorePlayer3.20 beta 7
    1. Mount mmcblk0p1 (by using the command: m1)
    2. Edit mnt/mmcblk0p1/config.txt - here you add dtoverlay=rpi-cirrus-wm5102 - then save your changes.
    3. Then reboot
    4. Then ssh into pCP again.
    5. Please report the content of:
    6. aplay -l
    7. squeezelite -l
    Hi there,

    On piCorePlayer 3.20 beta 7, I got this (i.e. Wolfson card did not load):

    Code:
    tc@piCorePlayer:~$ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
      Subdevices: 7/8
      Subdevice #0: subdevice #0
      Subdevice #1: subdevice #1
      Subdevice #2: subdevice #2
      Subdevice #3: subdevice #3
      Subdevice #4: subdevice #4
      Subdevice #5: subdevice #5
      Subdevice #6: subdevice #6
      Subdevice #7: subdevice #7
    card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    
    tc@piCorePlayer:~$ squeezelite -l
    Output devices:
      null                           - Discard all samples (playback) or generate zero samples (capture)
      sysdefault:CARD=ALSA           - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
    I then installed the latest Raspbian Jessie Lite and ran 'rpi-update' to get the latest kernel 4.9x. In this case, the Wolfson car did actually load:

    Code:
    pi@raspberrypi:~ $ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
      Subdevices: 8/8
      Subdevice #0: subdevice #0
      Subdevice #1: subdevice #1
      Subdevice #2: subdevice #2
      Subdevice #3: subdevice #3
      Subdevice #4: subdevice #4
      Subdevice #5: subdevice #5
      Subdevice #6: subdevice #6
      Subdevice #7: subdevice #7
    card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 1: RPiCirrus [RPi-Cirrus], device 0: WM5102 AiFi wm5102-aif1-0 []
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    
      
      pi@raspberrypi:~ $ squeezelite -l
    Output devices:
      null                           - Discard all samples (playback) or generate zero samples (capture)
      default:CARD=ALSA              - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
      sysdefault:CARD=ALSA           - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
      dmix:CARD=ALSA,DEV=0           - bcm2835 ALSA, bcm2835 ALSA - Direct sample mixing device
      dmix:CARD=ALSA,DEV=1           - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample mixing device
      dsnoop:CARD=ALSA,DEV=0         - bcm2835 ALSA, bcm2835 ALSA - Direct sample snooping device
      dsnoop:CARD=ALSA,DEV=1         - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample snooping device
      hw:CARD=ALSA,DEV=0             - bcm2835 ALSA, bcm2835 ALSA - Direct hardware device without any conversions
      hw:CARD=ALSA,DEV=1             - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct hardware device without any conversions
      plughw:CARD=ALSA,DEV=0         - bcm2835 ALSA, bcm2835 ALSA - Hardware device with all software conversions
      plughw:CARD=ALSA,DEV=1         - bcm2835 ALSA, bcm2835 IEC958/HDMI - Hardware device with all software conversions
      default:CARD=RPiCirrus         - RPi-Cirrus,  - Default Audio Device
      sysdefault:CARD=RPiCirrus      - RPi-Cirrus,  - Default Audio Device
      dmix:CARD=RPiCirrus,DEV=0      - RPi-Cirrus,  - Direct sample mixing device
      dsnoop:CARD=RPiCirrus,DEV=0    - RPi-Cirrus,  - Direct sample snooping device
      hw:CARD=RPiCirrus,DEV=0        - RPi-Cirrus,  - Direct hardware device without any conversions
      plughw:CARD=RPiCirrus,DEV=0    - RPi-Cirrus,  - Hardware device with all software conversions
    BTW, I have this Wolfson card from element14:

    http://au.element14.com/wolfson-micr...-55c5-00001621

    Cheers,
    Pete

  3. #83
    Junior Member
    Join Date
    Oct 2011
    Posts
    19
    BTW, to get the card working on Jessie Lite, I followed the below steps from http://www.horus.com/~hias/cirrus-driver.html

    Code:
    Configuration for kernel 4.9
    
    Enable the driver
    
    Add the following line to /boot/config.txt to enable the Cirrus Logic card driver
    
    dtoverlay=rpi-cirrus-wm5102
    
    Note: MMAP support is already enabled by default in kernel 4.9, you no longer need to add the i2s-mmap overlay.
    
    Setup module dependencies
    
    The cirrus driver requires some manually defined module dependencies, if you fail to add them the driver won't load properly.
    
    Create a file /etc/modprobe.d/cirrus.conf with the following content:
    
    softdep arizona-spi pre: arizona-ldo1
    Last edited by petar; 2017-04-18 at 14:56.

  4. #84

    MT7601U feedback

    Hi team,

    Perhaps noted with you, but not on the forum:

    Wifi chipset MT7601U ( mediatek ) was not working OK in Beta5
    I did an insitu upgrade , on my small 128 MB tf card, and it succeeded. ( resulted in PCP 3.20 B7 )
    After that upgrade the MT7601U wifi dongle worked.

    So a pi Zero, with a 128MB TF card and a 1Euro98 Wifi dongle give us a working PCP setup. Congratulations !
    ( I know no dac, no standard analogue, but free HDMI )

    Regards M-H
    Last edited by M-H; 2017-04-20 at 00:19.

  5. #85
    Junior Member
    Join Date
    Apr 2017
    Posts
    28

    3.2beta7

    3.2beta7
    cannot connect Wifi
    My devvice is RiP3b

  6. #86

    RPi 3B Broadcom WIFI.

    Quote Originally Posted by htctyo View Post
    3.2beta7
    cannot connect Wifi
    My devvice is RiP3b
    Hi htctyo , I hope you had a typo ( RIP3b vs RPi3b ) else the cause is known.

    Some constructive feedback : My pi-zero with Original raspberry pi foundation WiFi Dongle is working , and to my knowledge it is the same chipset, but connected differently to the system.

    [ 2.334522] usb 1-1: New USB device found, idVendor=0a5c, idProduct=bd1e
    [ 2.334564] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 2.334577] usb 1-1: Product: Remote Download Wireless Adapter
    [ 2.334586] usb 1-1: Manufacturer: Broadcom
    [ 2.334595] usb 1-1: SerialNumber: 000000000001

    However, it is not 100% stable, and more testing is needed to decide if it is an issue at my end ( power / other NW issue's )
    I have started it with a power-supply that should be OK, a music stream over WIFI and an almost flood-ping ( 10 per second ) to see network loss in the next hours.
    If needed I can repeat the tests with a Pi3B and on-board wifi, bit it will be troublesome as I need to unscrew it from its aluminium enclosure for a valid test. I hope others can verify the Pi3B

    MH

    Edit:
    Each 95/98 seconds there is a small outage, consistent over an hour or so, Verify test same setup but different dongle shows it is the Broadcom that is causing issues.
    Also 1 period of 98 seconds the whole set was unreachable on the network, but automagically came back.
    Pingplotter files on request .
    Last edited by M-H; 2017-04-19 at 03:02.

  7. #87

    Insitu upgrade script issue

    Not important to most, but a fault situation that is not handled in the script?

    If the free storage size is known to be insufficient, we'd better stop the downloads, and go to cleanup.

    Noted output :
    [ INFO ] You are downloading piCorePlayer3.20beta7
    [ INFO ] You are currently using piCorePlayer3.20beta5
    [ INFO ] Boot partition size required: 25500. Boot partition size is: 32768
    [ INFO ] PCP_DL=http://picoreplayer.sourceforge.net/tcz_repo/8.x/armv7/tcz
    [ ERROR ] Free space: 0k - Required space: 18072k
    [ ERROR ] Not enough free space - try expanding your partition.
    [ INFO ] Downloading new kernel modules: alsa-modules filesystems irda net-usb raid-dm touchscreen wireless
    [ ERROR] There was a error downloading alsa-modules-4.9.21-pcpCore_v7.tcz
    [ INFO ] Retrying extension alsa-modules-4.9.21-pcpCore_v7.tcz........in 5 seconds.
    etc...

    Regards MH

  8. #88
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    640
    Quote Originally Posted by M-H View Post
    Not important to most, but a fault situation that is not handled in the script?

    If the free storage size is known to be insufficient, we'd better stop the downloads, and go to cleanup.

    Noted output :
    [ INFO ] You are downloading piCorePlayer3.20beta7
    [ INFO ] You are currently using piCorePlayer3.20beta5
    [ INFO ] Boot partition size required: 25500. Boot partition size is: 32768
    [ INFO ] PCP_DL=http://picoreplayer.sourceforge.net/tcz_repo/8.x/armv7/tcz
    [ ERROR ] Free space: 0k - Required space: 18072k
    [ ERROR ] Not enough free space - try expanding your partition.
    [ INFO ] Downloading new kernel modules: alsa-modules filesystems irda net-usb raid-dm touchscreen wireless
    [ ERROR] There was a error downloading alsa-modules-4.9.21-pcpCore_v7.tcz
    [ INFO ] Retrying extension alsa-modules-4.9.21-pcpCore_v7.tcz........in 5 seconds.
    etc...

    Regards MH
    thanks for reporting

  9. #89
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    640
    M-H

    I've added the missing modules. On your system running 3.20 beta 7 (Regular pcpCore only), Do this update.

    Code:
    tc@piCorePlayer:~$ sudo vi /etc/modprobe.conf
    
    Add a the following line
    softdep arizona-spi pre: arizona-ldo1
    
    Then save.
    
    tc@piCorePlayer:~tc@piCorePlayer:~$ pcp bu
    [ INFO ] Backing up files to /mnt/mmcblk0p2/tce/mydata.tgz/
    Done.
    [ OK ] Backup successful.
    tc@piCorePlayer:~$ pcp-update alsa-modules-KERNEL
    rm: can't remove '/tmp/newdep.lst': No such file or directory
    [ INFO ] Checking for Updates
    
    [ INFO ] Checking: alsa-modules-4.9.21-pcpCore_v7.tcz       Update Required.
    [ INFO ] Done checking for updates
    
    [ INFO ] Reboot is required to complete update.
    tc@piCorePlayer:~$ pcp rb
    If you don't like to use vi, you can download nano.
    tce-load -wi nano.tcz

    And don't worry about that error message about /tmp/newdep.lst.

    Then go back to Steen's request to see if the card is loaded.

  10. #90
    Junior Member
    Join Date
    Apr 2017
    Posts
    28

    wifi

    My device is Rip3b , I use 3.2beta7 with internal Wifi but fail.
    Cannot scan any SSID . But use 3.11 is fine Wifi is OK

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •