Home of the Squeezebox™ & Transporter® network music players.
Page 98 of 103 FirstFirst ... 488896979899100 ... LastLast
Results 971 to 980 of 1021
  1. #971
    Junior Member
    Join Date
    Feb 2017
    Posts
    15
    Quote Originally Posted by paul- View Post
    The file system is read only, fstab is created at boot. THe SMB share can be configured via the pCP web interface, otherwise you need to put all of your commands in /opt/bootlocal.sh and then backup your changes by running "pcp bu"
    Excellent, thank you.

    M

  2. #972
    Member Bas Horneman's Avatar
    Join Date
    May 2007
    Location
    Netherlands
    Posts
    69
    However, I like others still have the vinyl-like crackle on playback
    I get that when I use ethernet. Goes away when using a wifi dongle. So it must be noise induced by a network cable.
    Life moves pretty fast. If you don't stop and look around once in a while, you could miss it. - Ferris Bueller

  3. #973
    Junior Member
    Join Date
    Oct 2014
    Posts
    11
    Quote Originally Posted by Bas Horneman View Post
    I get that when I use ethernet. Goes away when using a wifi dongle. So it must be noise induced by a network cable.
    I was getting it with a Pi Zero w, so no ethernet, just the on board wifi.... Changing from the audio to vanilla version of 3.11 cured it....

    Also, for me the crackle was only present when music was playing....

  4. #974
    Member Bas Horneman's Avatar
    Join Date
    May 2007
    Location
    Netherlands
    Posts
    69
    I was getting it with a Pi Zero w, so no etherne
    Ok...so different issue here. Mine was more noise as the music starts playing.
    Life moves pretty fast. If you don't stop and look around once in a while, you could miss it. - Ferris Bueller

  5. #975
    Senior Member Julf's Avatar
    Join Date
    Dec 2010
    Posts
    2,397
    Quote Originally Posted by Bas Horneman View Post
    Ok...so different issue here. Mine was more noise as the music starts playing.
    So you only get it when you start playing, not continuously? Is your ethernet UTP of STP?
    "To try to judge the real from the false will always be hard. In this fast-growing art of 'high fidelity' the quackery will bear a solid gilt edge that will fool many people" - Paul W Klipsch, 1953

  6. #976
    Member Bas Horneman's Avatar
    Join Date
    May 2007
    Location
    Netherlands
    Posts
    69
    Quote Originally Posted by Julf View Post
    So you only get it when you start playing, not continuously? Is your ethernet UTP of STP?
    It's most audible during the start. But I think the noise is there continuously. It is UTP (2m) from a powerline connection.
    Life moves pretty fast. If you don't stop and look around once in a while, you could miss it. - Ferris Bueller

  7. #977
    Junior Member
    Join Date
    Oct 2009
    Posts
    6

    zero w picoreplaer 3,11 hifiberry DAC+

    I have tried to get this combination up and running.

    The first thing I have done is to replace the files.
    remove these files from sdcard (space needed):
    bcm2708-rpi-b-plus.dtb
    bcm2708-rpi-b.dtb
    bcm2708-rpi-cm.dtb
    bcm2709-rpi-2-b.dtb
    bcm2710-rpi-3-b.dtb
    bcm2710-rpi-cm3.dtb

    copy files from 2017-03-02-raspbian-jessie-lite to sdcard:
    bcm2708-rpi-0-w.dtb
    bootcode.bin
    fixup.dat
    fixup_cd.dat
    fixup_x.dat
    start.elf
    start_cd.elf
    start_x.elf

    I'll also added newconfig for the wifi.
    I have picoreplayer up and running.
    But once I try to change to the DAC, picoreplayer stop running.

    It looks like the card is not present.
    Checked with squeezelite -l

    Please give me some tip on how to to solve the issue

  8. #978
    Junior Member
    Join Date
    Oct 2014
    Posts
    11
    Quote Originally Posted by newface View Post
    I have tried to get this combination up and running.

    The first thing I have done is to replace the files.
    remove these files from sdcard (space needed):
    bcm2708-rpi-b-plus.dtb
    bcm2708-rpi-b.dtb
    bcm2708-rpi-cm.dtb
    bcm2709-rpi-2-b.dtb
    bcm2710-rpi-3-b.dtb
    bcm2710-rpi-cm3.dtb

    copy files from 2017-03-02-raspbian-jessie-lite to sdcard:
    bcm2708-rpi-0-w.dtb
    bootcode.bin
    fixup.dat
    fixup_cd.dat
    fixup_x.dat
    start.elf
    start_cd.elf
    start_x.elf

    I'll also added newconfig for the wifi.
    I have picoreplayer up and running.
    But once I try to change to the DAC, picoreplayer stop running.

    It looks like the card is not present.
    Checked with squeezelite -l

    Please give me some tip on how to to solve the issue

    When you say you've checked with squeezelite -l, I assume you've tried all the output string options it suggests? If you haven't already, it'd be worth trying some other options from https://sites.google.com/site/picore...st-of-USB-DACs

    I had a similar issue with various dacs and the w - i've managed to get my Dacmagic XS working after much pretty random tweaking!

    Hopefully someone will be along soon with the exact answer!

  9. #979
    Senior Member Julf's Avatar
    Join Date
    Dec 2010
    Posts
    2,397
    Quote Originally Posted by Bas Horneman View Post
    It's most audible during the start. But I think the noise is there continuously. It is UTP (2m) from a powerline connection.
    Ah! Could the noise perhaps be caused by the powerline RF signal? It would be a pretty wide bandwidth, variable noise signal - and with a clear burst at the beginning as the song starts to be buffered.
    "To try to judge the real from the false will always be hard. In this fast-growing art of 'high fidelity' the quackery will bear a solid gilt edge that will fool many people" - Paul W Klipsch, 1953

  10. #980
    Junior Member
    Join Date
    Oct 2009
    Posts
    6
    Quote Originally Posted by steves999 View Post
    When you say you've checked with squeezelite -l, I assume you've tried all the output string options it suggests? If you haven't already, it'd be worth trying some other options from https://sites.google.com/site/picore...st-of-USB-DACs

    I had a similar issue with various dacs and the w - i've managed to get my Dacmagic XS working after much pretty random tweaking!

    Hopefully someone will be along soon with the exact answer!

    Thank's for the reply.
    I'm sorry to say that I don't think it's as easy as playing around with "the -o" options. (I have done that)
    The reason is that the DAC is not present, the card is not recognized by picoreplayer.
    The odd part is that if I use a USB-wifi and the "orginal" 3.11, the DAC will show up.
    But as soon I add the changed files, the card goes away.

    So I'm still lost.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •