Home of the Squeezebox™ & Transporter® network music players.
Page 1 of 150 1231151101 ... LastLast
Results 1 to 10 of 1498
  1. #1
    Senior Member sbp's Avatar
    Join Date
    Apr 2010
    Location
    Denmark
    Posts
    1,051

    Announce: piCorePlayer 2.00

    Hi all.

    We are ready to release a major update to piCorePlayer - so we decided to call i version 2.00 and start a new thread.
    The old one is huge and has been read more than 700.000 times, therefore it is time for a new thread.
    So thank you all for your continued interest and support.

    The major changes are:
    • Only one version of piCorePlayer, but it can now run on all known raspberry boards. So you can use the same piCorePlayer image for all your players.


    • Support for LMS. So now piCorePlayer can be used both as a player but also as a LMS server (or both) from version 2.03.


    • Shairport-sync is supported and can be enabled from the "tweaks" page. It will automatically show on your iDevice (iPad or iPhone) with the name you have given your piCorePlayer. This means that you now can stream from your iDevices to piCorePlayer. It will automatically switch from squeezelite to shairport and vice versa. Just stop/pause either squeezelite or Shairport.


    • piCorePlayer menu applet in Jivelite. This means that you will have a specific piCorePlayer menu in Jivelite. From here you can reboot and save eventual changes from within Jivelite. This menu is installed from your running LMS server. At the bottom of the Plugin page in LMS you will need to add piCorePlayer repro: http://picoreplayer.sourceforge.net/repo.xml Save.
      • Then you go to Jivelite on the piCorePlayer. Settings - Advanced - Applet installer - piCorePlayer menu - Install.
      • Next use the arrow in the top left corner to get to the main menu. Choose "quit" in the bottom of the screen (this will restart Jivelite - so the piCorePlayer menu is visible).
      • Go to Settings - choose piCorePlayer and select "Save settings to SD-card"


    • Kernel updated to 4.1.13 and piCore to version 7.0.


    Because this version is so different from the others it is not possible to use the "In situ" upgrade/downgrade system to go down from version 2.00 to a previous version. If you for some reason want to use an older version you will have to download the previous version and burn it to your SD-card.

    Please try it out. For this version Ralphy has been a tremendous help and he build the shairport-sync with all its dependencies. Kolossos made the piCorePlayer menu script and Paul made the LMS package that can run on piCorePlayer.

    Regards
    Greg, Ralphy, Paul and Steen

    Link: https://sites.google.com/site/picore.../home/download
    Last edited by sbp; 2016-03-19 at 03:35.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://sites.google.com/site/picoreplayer/home

    Please donate if you like the piCorePlayer

  2. #2
    Senior Member sbp's Avatar
    Join Date
    Apr 2010
    Location
    Denmark
    Posts
    1,051
    Reserved
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://sites.google.com/site/picoreplayer/home

    Please donate if you like the piCorePlayer

  3. #3
    Congratulations and thanks to you guys.
    pCP has been smashing all along and just keeps getting better.
    Tony

  4. #4
    Senior Member
    Join Date
    Jan 2008
    Posts
    344
    This is great!

    Now if you guys just add a Plex player to output over the HDMI port of the RPi, you will have created the perfect ultimate media box. <Joking, at least half.>

    Thanks for all your work.

  5. #5
    Installed and all fine with Pi2-IQaudioDAC+ with 7" touchscreen.
    Many thanks and congratulations.

    Incidentally, I'd been having power issues with a single power cable to this setup. I resolved this by finding a heavy duty 2 metre microUSB cable on Amazon, and picking up a three port USB power supply from Ikea (of all places). The USB power supply is I think rated at 3.4 A over all three outputs, 2.4A for a single output.

    Robert
    Last edited by Grumpy Bob; 2016-01-15 at 00:53.
    Home: Raspberry Pi 3/piCoreplayer/LMS7.9 with files on QNAP TS-239
    Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752 (plus Rega Planar 3 and Naim CD3)
    PiCorePlayer(Pi2) with touchscreen and IQAudIO DAC+>Sennheisers
    2 x Squeezebox Radios, 1 X Squeezebox 3 (retired)
    Office: LMS7.9 running on WiFi MyPassport drive > piCorePlayer(PiB)/HiFiBerryDAC > Amptastic Amplifier
    SqueezePad, iPeng as controllers

    last.fm/user/GrumpyBob

  6. #6

    Announce: piCorePlayer 2.00

    Thanks for this new version - it sounds really nice!

    But I have problems with the update from the web GUI. Iget the following
    result:

    --8<---------------cut here---------------start------------->8---
    [ INFO ] Mounting /mnt/mmcblk0p1...

    [ INFO ] Your config has been saved so your current settings will used be after updating piCorePlayer.

    [ INFO ] Untarring piCorePlayer2.00_boot.tar.gz...
    mnt/mmcblk0p1/
    mnt/mmcblk0p1/7.0.gz
    mnt/mmcblk0p1/COPYING.linux
    mnt/mmcblk0p1/LICENCE.broadcom
    mnt/mmcblk0p1/README
    mnt/mmcblk0p1/RELEASE
    mnt/mmcblk0p1/7.0v7.gz
    mnt/mmcblk0p1/bcm2709-rpi-2-b.dtb
    mnt/mmcblk0p1/bootcode.bin
    mnt/mmcblk0p1/cmdline.txt
    mnt/mmcblk0p1/config.txt
    mnt/mmcblk0p1/fixup.dat
    mnt/mmcblk0p1/fixup_cd.dat
    mnt/mmcblk0p1/fixup_db.dat
    mnt/mmcblk0p1/fixup_x.dat
    mnt/mmcblk0p1/overlays/
    mnt/mmcblk0p1/overlays/hifiberry-amp-overlay.dtb
    mnt/mmcblk0p1/overlays/spi-bcm2835-overlay.dtb
    mnt/mmcblk0p1/overlays/smi-dev-overlay.dtb
    mnt/mmcblk0p1/overlays/hifiberry-digi-overlay.dtb
    mnt/mmcblk0p1/overlays/tinylcd35-overlay.dtb
    mnt/mmcblk0p1/overlays/hy28a-overlay.dtb
    mnt/mmcblk0p1/overlays/pwm-2chan-overlay.dtb
    mnt/mmcblk0p1/overlays/at86rf233-overlay.dtb
    mnt/mmcblk0p1/overlays/piscreen2r-overlay.dtb
    mnt/mmcblk0p1/overlays/dht11-overlay.dtb
    mnt/mmcblk0p1/overlays/lirc-rpi-overlay.dtb
    mnt/mmcblk0p1/overlays/vga666-overlay.dtb
    mnt/mmcblk0p1/overlays/rpi-display-overlay.dtb
    mnt/mmcblk0p1/overlays/piscreen-overlay.dtb
    mnt/mmcblk0p1/overlays/i2c-rtc-overlay.dtb
    mnt/mmcblk0p1/overlays/rpi-proto-overlay.dtb
    mnt/mmcblk0p1/overlays/smi-nand-overlay.dtb
    mnt/mmcblk0p1/overlays/spi-bcm2708-overlay.dtb
    mnt/mmcblk0p1/overlays/hy28b-overlay.dtb
    mnt/mmcblk0p1/overlays/spi-dma-overlay.dtb
    mnt/mmcblk0p1/overlays/sdio-overlay.dtb
    mnt/mmcblk0p1/overlays/mz61581-overlay.dtb
    mnt/mmcblk0p1/overlays/sdhost-overlay.dtb
    mnt/mmcblk0p1/overlays/hifiberry-dacplus-overlay.dtb
    mnt/mmcblk0p1/overlays/pps-gpio-overlay.dtb
    mnt/mmcblk0p1/overlays/hifiberry-dac-overlay.dtb
    mnt/mmcblk0p1/overlays/rpi-backlight-overlay.dtb
    mnt/mmcblk0p1/overlays/pitft28-resistive-overlay.dtb
    mnt/mmcblk0p1/overlays/rpi-dac-overlay.dtb
    mnt/mmcblk0p1/overlays/mmc-overlay.dtb
    mnt/mmcblk0p1/overlays/mcp2515-can1-overlay.dtb
    mnt/mmcblk0p1/overlays/uart1-overlay.dtb
    mnt/mmcblk0p1/overlays/smi-overlay.dtb
    mnt/mmcblk0p1/overlays/README
    mnt/mmcblk0p1/overlays/rpi-sense-overlay.dtb
    mnt/mmcblk0p1/overlays/enc28j60-overlay.dtb
    mnt/mmcblk0p1/overlays/mcp2515-can0-overlay.dtb
    mnt/mmcblk0p1/overlays/iqaudio-dacplus-overlay.dtb
    mnt/mmcblk0p1/overlays/gpio-poweroff-overlay.dtb
    mnt/mmcblk0p1/overlays/iqaudio-dac-overlay.dtb
    mnt/mmcblk0p1/overlays/w1-gpio-pullup-overlay.dtb
    mnt/mmcblk0p1/overlays/w1-gpio-overlay.dtb
    mnt/mmcblk0p1/overlays/raspidac3-overlay.dtb
    mnt/mmcblk0p1/overlays/pwm-overlay.dtb
    mnt/mmcblk0p1/overlays/i2s-mmap-overlay.dtb
    mnt/mmcblk0p1/overlays/ads7846-overlay.dtb
    mnt/mmcblk0p1/overlays/bmp085_i2c-sensor-overlay.dtb
    mnt/mmcblk0p1/overlays/rpi-ft5406-overlay.dtb
    mnt/mmcblk0p1/overlays/gpio-ir-overlay.dtb
    mnt/mmcblk0p1/overlays/i2c-gpio-overlay.dtb
    mnt/mmcblk0p1/overlays/pitft28-capacitive-overlay.dtb
    mnt/mmcblk0p1/start.elf
    mnt/mmcblk0p1/start_cd.elf
    mnt/mmcblk0p1/start_x.elf
    mnt/mmcblk0p1/LICENCE.piCorePlayer
    mnt/mmcblk0p1/kernel4113v7.img
    mnt/mmcblk0p1/kernel4113.img

    [ INFO ] Unmounting /mnt/mmcblk0p1...

    [ ERROR ] piCorePlayer has NOT been updated.
    --8<---------------cut here---------------end--------------->8---

    Is there anywhere where I can see the full log why it failed?


    sbp <sbp.79i3jz (AT) no-mx (DOT) forums.slimdevices.com> writes:

    > Hi all.
    >
    > We are ready to release a major update to piCorePlayer - so we decided
    > to call i version 2.00 and start a new thread.
    > The old one is huge and has been read more than 700.000 times, therefore
    > it is time for a new thread.
    > So thank you all for your continued interest and support.
    >
    > THE MAJOR CHANGES ARE:
    > - Only *one version of piCorePlayer*, but it can now run on all known
    > raspberry boards. So you can use the same piCorePlayer image for all
    > your players.
    >
    >
    >
    >
    >
    > - *Shairport-sync* is supported and can be enabled from the "tweaks"
    > page. It will automatically show on your iDevice (iPad or iPhone) with
    > the name you have given your piCorePlayer. This means that you now can
    > stream from your iDevices to piCorePlayer. It will automatically
    > switch from squeezelite to shairport and vice versa. Just stop/pause
    > either squeezelite or Shairport.
    >
    >
    >
    >
    >
    > - *piCorePlayer menu applet in* *Jivelite. *This means that you will
    > have a specific piCorePlayer menu in Jivelite. From here you can
    > reboot and save eventual changes from within Jivelite. This menu is
    > installed from your running LMS server. At the bottom of the Plugin
    > page in LMS you will need to add piCorePlayer repro:
    > http://picoreplayer.sourceforge.net/repo.xml Save.
    >
    > - Then you go to Jivelite on the piCorePlayer. Settings - Advanced -
    > Applet installer - piCorePlayer menu - Install.
    > - Next use the arrow in the top left corner to get to the main menu.
    > Choose "quit" in the bottom of the screen (this will restart
    > Jivelite - so the piCorePlayer menu is visible).
    > - Go to Settings - choose piCorePlayer and select "Save settings to
    > SD-card"
    >
    >
    >
    >
    >
    >
    > - Kernel updated to 4.1.13 and piCore to version 7.0.
    >
    >
    > Because this version is so different from the others it is not possible
    > to use the "In situ" upgrade/downgrade system to go down from version
    > 2.00 to a previous version. If you for some reason want to use an older
    > version you will have to download the previous version and burn it to
    > your SD-card.
    >
    > Please try it out. For this version Ralphy has been a tremendous help
    > and he build the shairport-sync with all its dependencies. Kolossos made
    > the piCorePlayer menu script.
    >
    > Regards
    > Greg, Ralphy and Steen
    >
    >
    >
    > piCorePlayer a small player for the Raspberry Pi in RAM.
    > Homepage: https://sites.google.com/site/picoreplayer/home
    >
    > *Please 'donate'
    > (https://www.paypal.com/cgi-bin/websc...if%3aNonHosted)
    > if you like the piCorePlayer*
    > ------------------------------------------------------------------------
    > sbp's Profile: http://forums.slimdevices.com/member.php?userid=37237
    > View this thread: http://forums.slimdevices.com/showthread.php?t=105018
    >
    >

  7. #7

    Announce: piCorePlayer 2.00

    Just took the card out of the pi and installed directly - worked,
    running, nice.

    Thanks,

    Rainer

    Rainer M Krug <Rainer (AT) krugs (DOT) de> writes:

    > Thanks for this new version - it sounds really nice!
    >
    > But I have problems with the update from the web GUI. Iget the following
    > result:
    >
    > [ INFO ] Mounting /mnt/mmcblk0p1...
    >
    > [ INFO ] Your config has been saved so your current settings will used be after updating piCorePlayer.
    >
    > [ INFO ] Untarring piCorePlayer2.00_boot.tar.gz...
    > mnt/mmcblk0p1/
    > mnt/mmcblk0p1/7.0.gz
    > mnt/mmcblk0p1/COPYING.linux
    > mnt/mmcblk0p1/LICENCE.broadcom
    > mnt/mmcblk0p1/README
    > mnt/mmcblk0p1/RELEASE
    > mnt/mmcblk0p1/7.0v7.gz
    > mnt/mmcblk0p1/bcm2709-rpi-2-b.dtb
    > mnt/mmcblk0p1/bootcode.bin
    > mnt/mmcblk0p1/cmdline.txt
    > mnt/mmcblk0p1/config.txt
    > mnt/mmcblk0p1/fixup.dat
    > mnt/mmcblk0p1/fixup_cd.dat
    > mnt/mmcblk0p1/fixup_db.dat
    > mnt/mmcblk0p1/fixup_x.dat
    > mnt/mmcblk0p1/overlays/
    > mnt/mmcblk0p1/overlays/hifiberry-amp-overlay.dtb
    > mnt/mmcblk0p1/overlays/spi-bcm2835-overlay.dtb
    > mnt/mmcblk0p1/overlays/smi-dev-overlay.dtb
    > mnt/mmcblk0p1/overlays/hifiberry-digi-overlay.dtb
    > mnt/mmcblk0p1/overlays/tinylcd35-overlay.dtb
    > mnt/mmcblk0p1/overlays/hy28a-overlay.dtb
    > mnt/mmcblk0p1/overlays/pwm-2chan-overlay.dtb
    > mnt/mmcblk0p1/overlays/at86rf233-overlay.dtb
    > mnt/mmcblk0p1/overlays/piscreen2r-overlay.dtb
    > mnt/mmcblk0p1/overlays/dht11-overlay.dtb
    > mnt/mmcblk0p1/overlays/lirc-rpi-overlay.dtb
    > mnt/mmcblk0p1/overlays/vga666-overlay.dtb
    > mnt/mmcblk0p1/overlays/rpi-display-overlay.dtb
    > mnt/mmcblk0p1/overlays/piscreen-overlay.dtb
    > mnt/mmcblk0p1/overlays/i2c-rtc-overlay.dtb
    > mnt/mmcblk0p1/overlays/rpi-proto-overlay.dtb
    > mnt/mmcblk0p1/overlays/smi-nand-overlay.dtb
    > mnt/mmcblk0p1/overlays/spi-bcm2708-overlay.dtb
    > mnt/mmcblk0p1/overlays/hy28b-overlay.dtb
    > mnt/mmcblk0p1/overlays/spi-dma-overlay.dtb
    > mnt/mmcblk0p1/overlays/sdio-overlay.dtb
    > mnt/mmcblk0p1/overlays/mz61581-overlay.dtb
    > mnt/mmcblk0p1/overlays/sdhost-overlay.dtb
    > mnt/mmcblk0p1/overlays/hifiberry-dacplus-overlay.dtb
    > mnt/mmcblk0p1/overlays/pps-gpio-overlay.dtb
    > mnt/mmcblk0p1/overlays/hifiberry-dac-overlay.dtb
    > mnt/mmcblk0p1/overlays/rpi-backlight-overlay.dtb
    > mnt/mmcblk0p1/overlays/pitft28-resistive-overlay.dtb
    > mnt/mmcblk0p1/overlays/rpi-dac-overlay.dtb
    > mnt/mmcblk0p1/overlays/mmc-overlay.dtb
    > mnt/mmcblk0p1/overlays/mcp2515-can1-overlay.dtb
    > mnt/mmcblk0p1/overlays/uart1-overlay.dtb
    > mnt/mmcblk0p1/overlays/smi-overlay.dtb
    > mnt/mmcblk0p1/overlays/README
    > mnt/mmcblk0p1/overlays/rpi-sense-overlay.dtb
    > mnt/mmcblk0p1/overlays/enc28j60-overlay.dtb
    > mnt/mmcblk0p1/overlays/mcp2515-can0-overlay.dtb
    > mnt/mmcblk0p1/overlays/iqaudio-dacplus-overlay.dtb
    > mnt/mmcblk0p1/overlays/gpio-poweroff-overlay.dtb
    > mnt/mmcblk0p1/overlays/iqaudio-dac-overlay.dtb
    > mnt/mmcblk0p1/overlays/w1-gpio-pullup-overlay.dtb
    > mnt/mmcblk0p1/overlays/w1-gpio-overlay.dtb
    > mnt/mmcblk0p1/overlays/raspidac3-overlay.dtb
    > mnt/mmcblk0p1/overlays/pwm-overlay.dtb
    > mnt/mmcblk0p1/overlays/i2s-mmap-overlay.dtb
    > mnt/mmcblk0p1/overlays/ads7846-overlay.dtb
    > mnt/mmcblk0p1/overlays/bmp085_i2c-sensor-overlay.dtb
    > mnt/mmcblk0p1/overlays/rpi-ft5406-overlay.dtb
    > mnt/mmcblk0p1/overlays/gpio-ir-overlay.dtb
    > mnt/mmcblk0p1/overlays/i2c-gpio-overlay.dtb
    > mnt/mmcblk0p1/overlays/pitft28-capacitive-overlay.dtb
    > mnt/mmcblk0p1/start.elf
    > mnt/mmcblk0p1/start_cd.elf
    > mnt/mmcblk0p1/start_x.elf
    > mnt/mmcblk0p1/LICENCE.piCorePlayer
    > mnt/mmcblk0p1/kernel4113v7.img
    > mnt/mmcblk0p1/kernel4113.img
    >
    > [ INFO ] Unmounting /mnt/mmcblk0p1...
    >
    > [ ERROR ] piCorePlayer has NOT been updated.
    >
    > Is there anywhere where I can see the full log why it failed?
    >
    >
    > sbp <sbp.79i3jz (AT) no-mx (DOT) forums.slimdevices.com> writes:
    >
    >> Hi all.
    >>
    >> We are ready to release a major update to piCorePlayer - so we decided
    >> to call i version 2.00 and start a new thread.
    >> The old one is huge and has been read more than 700.000 times, therefore
    >> it is time for a new thread.
    >> So thank you all for your continued interest and support.
    >>
    >> THE MAJOR CHANGES ARE:
    >> - Only *one version of piCorePlayer*, but it can now run on all known
    >> raspberry boards. So you can use the same piCorePlayer image for all
    >> your players.
    >>
    >>
    >>
    >>
    >>
    >> - *Shairport-sync* is supported and can be enabled from the "tweaks"
    >> page. It will automatically show on your iDevice (iPad or iPhone) with
    >> the name you have given your piCorePlayer. This means that you now can
    >> stream from your iDevices to piCorePlayer. It will automatically
    >> switch from squeezelite to shairport and vice versa. Just stop/pause
    >> either squeezelite or Shairport.
    >>
    >>
    >>
    >>
    >>
    >> - *piCorePlayer menu applet in* *Jivelite. *This means that you will
    >> have a specific piCorePlayer menu in Jivelite. From here you can
    >> reboot and save eventual changes from within Jivelite. This menu is
    >> installed from your running LMS server. At the bottom of the Plugin
    >> page in LMS you will need to add piCorePlayer repro:
    >> http://picoreplayer.sourceforge.net/repo.xml Save.
    >>
    >> - Then you go to Jivelite on the piCorePlayer. Settings - Advanced -
    >> Applet installer - piCorePlayer menu - Install.
    >> - Next use the arrow in the top left corner to get to the main menu.
    >> Choose "quit" in the bottom of the screen (this will restart
    >> Jivelite - so the piCorePlayer menu is visible).
    >> - Go to Settings - choose piCorePlayer and select "Save settings to
    >> SD-card"
    >>
    >>
    >>
    >>
    >>
    >>
    >> - Kernel updated to 4.1.13 and piCore to version 7.0.
    >>
    >>
    >> Because this version is so different from the others it is not possible
    >> to use the "In situ" upgrade/downgrade system to go down from version
    >> 2.00 to a previous version. If you for some reason want to use an older
    >> version you will have to download the previous version and burn it to
    >> your SD-card.
    >>
    >> Please try it out. For this version Ralphy has been a tremendous help
    >> and he build the shairport-sync with all its dependencies. Kolossos made
    >> the piCorePlayer menu script.
    >>
    >> Regards
    >> Greg, Ralphy and Steen
    >>
    >>
    >>
    >> piCorePlayer a small player for the Raspberry Pi in RAM.
    >> Homepage: https://sites.google.com/site/picoreplayer/home
    >>
    >> *Please 'donate'
    >> (https://www.paypal.com/cgi-bin/websc...if%3aNonHosted)
    >> if you like the piCorePlayer*
    >> ------------------------------------------------------------------------
    >> sbp's Profile: http://forums.slimdevices.com/member.php?userid=37237
    >> View this thread: http://forums.slimdevices.com/showthread.php?t=105018
    >>
    >>

  8. #8

    Announce: piCorePlayer 2.00

    Very nice - works. Apart from the Shairport feature.

    If I disable it (tweaks page), Shqirport is not shown on the Main Page,
    but I gan still see the AirPlay point Lounge (the piCorePlayer) but not
    play to it.

    If I enable Shairport, I see it on the Main Page, but the dot is red and
    it says "not running".
    I see "Lounge" under the AirPlay points, but I also can't play via
    airplay.

    How can I debug what is happening?


    sbp <sbp.79i3jz (AT) no-mx (DOT) forums.slimdevices.com> writes:

    > Hi all.
    >
    > - *Shairport-sync* is supported and can be enabled from the "tweaks"
    > page. It will automatically show on your iDevice (iPad or iPhone) with
    > the name you have given your piCorePlayer. This means that you now can
    > stream from your iDevices to piCorePlayer. It will automatically
    > switch from squeezelite to shairport and vice versa. Just stop/pause
    > either squeezelite or Shairport.
    >
    >
    >
    >


    --
    Rainer M. Krug
    email: Rainer<at>krugs<dot>de
    PGP: 0x0F52F982


  9. #9
    Senior Member sbp's Avatar
    Join Date
    Apr 2010
    Location
    Denmark
    Posts
    1,051
    Hi Rainer.

    A few ideas.
    1. Have you rebooted after each change of the shairport settings. Enabled / disabled?
    2. Could it be the name you have chosen. I haven't tested a name with empty space. Try a simple name like lounge.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://sites.google.com/site/picoreplayer/home

    Please donate if you like the piCorePlayer

  10. #10

    Announce: piCorePlayer 2.00

    Rainer M Krug <Rainer (AT) krugs (DOT) de> writes:

    > Very nice - works. Apart from the Shairport feature.
    >
    > If I disable it (tweaks page), Shqirport is not shown on the Main Page,
    > but I gan still see the AirPlay point Lounge (the piCorePlayer) but not
    > play to it.
    >
    > If I enable Shairport, I see it on the Main Page, but the dot is red and
    > it says "not running".
    > I see "Lounge" under the AirPlay points, but I also can't play via
    > airplay.
    >
    > How can I debug what is happening?


    OK - got it working. There seems to be a conflict between Shairport and
    ShairTunes2 (on LMS) possibly because of naming of airport points? I
    uninstalled the AirTunes2 plugin on the LMS and everything is working.

    Thanks a lot.

    Rainer

    >
    >
    > sbp <sbp.79i3jz (AT) no-mx (DOT) forums.slimdevices.com> writes:
    >
    >> Hi all.
    >>
    >> - *Shairport-sync* is supported and can be enabled from the "tweaks"
    >> page. It will automatically show on your iDevice (iPad or iPhone) with
    >> the name you have given your piCorePlayer. This means that you now can
    >> stream from your iDevices to piCorePlayer. It will automatically
    >> switch from squeezelite to shairport and vice versa. Just stop/pause
    >> either squeezelite or Shairport.
    >>
    >>
    >>
    >>


    --
    Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany)

    Centre of Excellence for Invasion Biology
    Stellenbosch University
    South Africa

    Tel : +33 - (0)9 53 10 27 44
    Cell: +33 - (0)6 85 62 59 98
    Fax : +33 - (0)9 58 10 27 44

    Fax (D): +49 - (0)3 21 21 25 22 44

    email: Rainer (AT) krugs (DOT) de

    Skype: RMkrug

    PGP: 0x0F52F982


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •