RE: shuffle CLI documentation patch

[Laurence Hardwick]

Thanks Jason

I chose not to power the player off because
someone may be actually listening to the output !
(so Power on / Power off brightness are not so useful).
So I am just dimming the displays round the house
(anyone in the room can easily turn the display back up
if they need to).

What I have works, but an interrogate and/or set brightness
would be better if there is a CLI for it.

Laurence

> -----Original Message-----
> From: developers-bounces (AT) lists (DOT) slimdevices.com
> [mailto:developers-bounces (AT) lists (DOT) slimdevices.com]On Behalf Of Jason
> Holtzapple
> Sent: 13 November 2003 15:08
> To: SLIMP3 Developers
> Subject: Re: [Developers] shuffle CLI documentation patch
>
>
> --- Laurence Hardwick <laurence.hardwick (AT) openwave (DOT) com> wrote:
> >
> > Thanks....Interesting
> >
> > Is there a similar interface for the dimming state
> > of the plasma display ?
>
> I haven't tried it but 'playerpref powerOffBrightness' and
> 'powerOnBrightness'
> will
> probably do what you want. You can set them from 0 (off) to 4 (bright)
>
> --Jason
>
> __________________________________
> Do you Yahoo!?
> Protect your identity with Yahoo! Mail AddressGuard
> http://antispam.yahoo.com/whatsnewfree
>

[dean]

Those commands changes the brightness when the unit is powered on or
off, respectively. They don't actually change the power state of the
player.

-dean

On Nov 13, 2003, at 7:13 AM, Laurence Hardwick wrote:

>
> Thanks Jason
>
> I chose not to power the player off because
> someone may be actually listening to the output !
> (so Power on / Power off brightness are not so useful).
> So I am just dimming the displays round the house
> (anyone in the room can easily turn the display back up
> if they need to).
>
> What I have works, but an interrogate and/or set brightness
> would be better if there is a CLI for it.
>
> Laurence
>
>> -----Original Message-----
>> From: developers-bounces (AT) lists (DOT) slimdevices.com
>> [mailto:developers-bounces (AT) lists (DOT) slimdevices.com]On Behalf Of Jason
>> Holtzapple
>> Sent: 13 November 2003 15:08
>> To: SLIMP3 Developers
>> Subject: Re: [Developers] shuffle CLI documentation patch
>>
>>
>> --- Laurence Hardwick <laurence.hardwick (AT) openwave (DOT) com> wrote:
>>>
>>> Thanks....Interesting
>>>
>>> Is there a similar interface for the dimming state
>>> of the plasma display ?
>>
>> I haven't tried it but 'playerpref powerOffBrightness' and
>> 'powerOnBrightness'
>> will
>> probably do what you want. You can set them from 0 (off) to 4 (bright)
>>
>> --Jason
>>
>> __________________________________
>> Do you Yahoo!?
>> Protect your identity with Yahoo! Mail AddressGuard
>> http://antispam.yahoo.com/whatsnewfree
>>