PDA

View Full Version : QNAP TS-101 not starting Slimserver


RobA
2006-12-29, 06:41
Hi,

I've had a search for the answer to this question with no success so apologies if i'm duplicating an earlier question.

I have recently acquired a QNAP TS-101 and hooked it up successfully to my wireless network and squeezebox. However, following a power cut last night, the slimserver is no longer running despite a couple of restarts of both it and the network itself.

When I go to the //[ip_address]:9000 page, I see a TwonkyMedia Status page and not the SlimServer that I am hoping for. My squeezebox is also unable to see a SlimServer running from the Qnap.

Is there a way to restart the SlimServer manually or any other solution to this problem?

Thanks in advance!

Rob
RobA
2006-12-29, 09:02
Further to the above, I am running slimserver 6.2.2 and have tried installing the "all-in-one" update and the "database clear" update. They both appear to have taken successfully but have not solved the problem.
Seineseeker
2006-12-29, 09:47
It maybe the IP address of Slimserver has changed. Use the QNAP utility to verify the IP address. I have had power cuts and when it reboots the last number of the IP address changes.
2pods
2006-12-29, 11:50
You could try disabling Twonky as if this and SS is on the same port there would be trouble.

Peter
RobA
2006-12-29, 17:03
IP Address seems to be ok.

How might I disable Twonky, if that were to be the corect option?
bonze
2006-12-30, 04:59
IP Address seems to be ok.

How might I disable Twonky, if that were to be the corect option?
From the Administration settings
Network settings:
Multimedia Station:
untick 'Enable UPnP MediaServer'
RobA
2006-12-30, 05:16
It works. Thanks very much for your help!

It's taken just long enough this morning that I missed out on doing any housework. Marvellous!
2pods
2006-12-30, 06:22
Happy to help :-)

I'm still really a newbie too.

Peter